- Application Range
- Compatible Grades
- Cutting Speeds
Mitsubishi - VP30RT Menu
| General Information: | ||
|---|---|---|
| Brand | Mitsubishi | |
| Grade Status | Primary | |
| Applications | Milling / Parting / Grooving | |
| Substrate Class | Tough | |
| Coat Type | PVD | |
| Post Treat | N | |
From Mitsubishi's website:
Tough PVD grade
Application Range for VP30RT
* If you don't understand the below table? Read This Explanation to make the most out of it!
| ISO | Material Group | app | pmksort | App | Apps Range | 05 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P | Steel | M | 0 | Milling | P25 - P45 | P | P | P | P | P | ||||
| P | Steel | P | 0 | Parting | P20 - P40 | P | P | P | P | P | ||||
| M | Stainless Steel | P | 1 | Parting | M20 - M40 | M | M | M | M | M | ||||
| K | Cast Iron | P | 2 | Parting | K20 - K40 | K | K | K | K | K | ||||
| S | Superalloys | P | 4 | Parting | S25 - S40 | S | S | S | S | |||||
| P | Steel | G | 0 | Grooving | P20 - P40 | P | P | P | P | P | ||||
| M | Stainless Steel | G | 1 | Grooving | M20 - M40 | M | M | M | M | M | ||||
| S | Superalloys | G | 4 | Grooving | S25 - S40 | S | S | S | S |
Equivalent Grades for VP30RT
The most compatible grade from each brand!
A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to VP30RT
| Brand | Application | Grade | Substrate | Coating | Gscore |
|---|---|---|---|---|---|
| Sandvik | Milling | GC1040 | Semi Tough | Thin PVD | 80% |
| Iscar | Milling | IC330 | Tough | Thin PVD | 95% |
| Kennametal | Milling | KCSM40 | Tough | PVD | 95% |
| Walter | Milling | WSM35S | Semi Tough | PVD | 90% |
| Seco | Milling | F40M | Semi Tough | PVD | 90% |
| Tungaloy | Milling | AH130 | Semi Tough | PVD | 90% |
| Sumitomo | Milling | ACP200 | Tough | PVD | 95% |
| Sandvik | Parting | GC1135 | Tough | Thin PVD | 85% |
| Iscar | Parting | IC830 | Tough | PVD | 95% |
| Kennametal | Parting | KCU25 | Semi Hard | Thin PVD | 75% |
| Walter | Parting | WSM33S | Semi Tough | PVD | 90% |
| Seco | Parting | TGP45 | Tough | CVD | 85% |
| Tungaloy | Parting | GH130 | Tough | Thin PVD | 90% |
| Sumitomo | Parting | AC830P | Tough | Thin CVD | 75% |
| Sandvik | Grooving | GC4325 | Semi Tough | CVD | 60% |
| Iscar | Grooving | IC830 | Tough | PVD | 95% |
| Kennametal | Grooving | KCU25 | Semi Hard | Thin PVD | 75% |
| Walter | Grooving | WSM33S | Semi Tough | PVD | 90% |
| Seco | Grooving | CP600 | Semi Tough | Thin PVD | 80% |
| Tungaloy | Grooving | GH130 | Tough | Thin PVD | 90% |
| Sumitomo | Grooving | AC830P | Tough | Thin CVD | 75% |
Cutting Speed recommendations for VP30RT
How to use our Cutting Speeds Recommendations
- Pay attention that your desired unit (SFM or m/min) is selected!
- Speeds are given for stable conditions of Machine, Tool, and workpiece.
- An empty cell means the grade is not available for the combination of material and application.
- For more specific Cutting Speeds Recommendations use our advanced
SPEEDS AND FEEDS CALCULATOR
Unit Selector:
SFM
m/min
| uid | _ | Material Group | Turning (m/min) | Turning (SFM) | Parting (m/min) | Parting (SFM) | Grooving (m/min) | Grooving (SFM) | Milling (m/min) | Milling (SFM) | Driiling (mm/min) | Drilling (SFM) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| s650ca7189cbd | P | Free-Cut Steel | - | - | 120 - 235 | 360 - 710 | 110 - 210 | 330 - 640 | 180 - 350 | 540 - 1060 | - | - |
| s650ca7189cbd | P | Low Carbon Steel (0.1-0.25%) | - | - | 110 - 140 | 330 - 420 | 100 - 125 | 300 - 380 | 165 - 205 | 500 - 620 | - | - |
| s650ca7189cbd | P | Carbon Steel (0.26-0.50%) | - | - | 95 - 140 | 280 - 420 | 85 - 125 | 250 - 380 | 140 - 205 | 420 - 620 | - | - |
| s650ca7189cbd | P | High Carbon Steel (0.51-1.0%) | - | - | 75 - 95 | 220 - 280 | 70 - 85 | 210 - 250 | 115 - 140 | 350 - 420 | - | - |
| s650ca7189cbd | P | Low Alloyed Steel (180 HB Max) | - | - | 120 - 145 | 360 - 440 | 110 - 130 | 330 - 390 | 180 - 215 | 540 - 650 | - | - |
| s650ca7189cbd | P | Low Alloyed Steel (180-275 HB) | - | - | 70 - 120 | 210 - 360 | 60 - 110 | 180 - 330 | 105 - 180 | 320 - 540 | - | - |
| s650ca7189cbd | P | Low Alloyed Steel (275 -350 HB) | - | - | 45 - 70 | 130 - 210 | 40 - 60 | 120 - 180 | 65 - 105 | 190 - 320 | - | - |
| s650ca7189cbd | P | Tool Steel and High Alloy Steel (Annealed) | - | - | 40 - 95 | 120 - 280 | 35 - 85 | 100 - 250 | 60 - 140 | 180 - 420 | - | - |
| s650ca7189cbd | P | Tool Steel and High Alloy Steel (250-300 HB) | - | - | 30 - 70 | 90 - 210 | 25 - 60 | 70 - 180 | 45 - 105 | 130 - 320 | - | - |
| s650ca7189cbd | M | Ferritic Stainless Steel | - | - | 50 - 130 | 150 - 390 | 70 - 175 | 210 - 530 | - | - | - | - |
| s650ca7189cbd | M | Martensitic Stainless Steel | - | - | 50 - 80 | 150 - 240 | 70 - 105 | 210 - 320 | - | - | - | - |
| s650ca7189cbd | M | Austenitic Stainless Steel | - | - | 50 - 65 | 150 - 190 | 70 - 85 | 210 - 250 | - | - | - | - |
| s650ca7189cbd | M | Duplex Stainless Steel | - | - | 15 - 45 | 40 - 130 | 20 - 60 | 60 - 180 | - | - | - | - |
| s650ca7189cbd | M | Precipitation Hardening St. St. | - | - | 60 - 75 | 180 - 220 | 80 - 95 | 240 - 280 | - | - | - | - |
| s650ca7189cbd | K | Grey Cast Iron (180 HB Max) | - | - | 90 - 120 | 270 - 360 | - | - | - | - | - | - |
| s650ca7189cbd | K | Grey Cast Iron (180-260 HB) | - | - | 55 - 95 | 160 - 280 | - | - | - | - | - | - |
| s650ca7189cbd | K | Nodular cast iron (160 HB Max) | - | - | 90 - 130 | 270 - 390 | - | - | - | - | - | - |
| s650ca7189cbd | K | Nodular cast iron (180-280 HB) | - | - | 35 - 85 | 100 - 250 | - | - | - | - | - | - |
| s650ca7189cbd | K | Malleable cast iron (180 HB Max) | - | - | 85 - 125 | 250 - 380 | - | - | - | - | - | - |
| s650ca7189cbd | K | Malleable cast iron (180-270 HB) | - | - | 35 - 85 | 100 - 250 | - | - | - | - | - | - |
| s650ca7189cbd | S | Iron (Fe) Based - Supper Alloys | - | - | 20 - 35 | 60 - 100 | -115 - -230 | -350 - -700 | - | - | - | - |
| s650ca7189cbd | S | Nickel (Ni) Based - Supper Alloys (20 HRC Max | - | - | 10 - 35 | 30 - 100 | -70 - -210 | -210 - -640 | - | - | - | - |
| s650ca7189cbd | S | Nickel (Ni) Based - Supper Alloys (21-42 HRC) | - | - | 5 - 15 | 10 - 40 | -40 - -90 | -120 - -270 | - | - | - | - |
| s650ca7189cbd | S | Cobalt (Co) Based - Supper Alloys | - | - | 5 - 15 | 10 - 40 | -30 - -90 | -90 - -270 | - | - | - | - |
| s650ca7189cbd | S | Pure Titaium | - | - | 20 - 35 | 60 - 100 | -130 - -215 | -390 - -650 | - | - | - | - |
| s650ca7189cbd | S | Titanium alloys | - | - | 10 - 20 | 30 - 60 | -70 - -140 | -210 - -420 | - | - | - | - |
