General Information for Grade S30T
| Bran | Sandvik | |
| Grade Status | Active - Primary | |
| Main Applications | Milling | |
| Substrate Class | Semi Hard | |
| Coat Type | Thin PVD | |
| Post Treat | N |
From Sandvik's website:
This is a PVD-coated carbide grade optimized for titanium milling; excellent for finishing to light roughing. This thin-coated grade enables very sharp cutting edges that resist fatigue and micro-chipping, for cutting edges that are preserved for longer times in cut at higher cutting speeds.
Application Range for S30T
* If you don't understand the below table? Read This Explanation to make the most out of it!
Equivalent Grades for S30T
The most compatible grade from each brand!
A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to S30T
Cutting Speed recommendations for S30T
How to use our Cutting Speeds Recommendations
- Pay attention that your desired unit (SFM or mm/min) is selected!
- Speeds are given for stable conditions of Machine, Tool, and workpiece.
- An empty cell means the grade is not available for the combination of material and application.
- For more specific Cutting Speeds Recommendations use our advanced
SPEEDS AND FEEDS CALCULATOR
Unit Selector:
SFM
mm/min
