Grade Info

General Information:
Grade StatusPrimary
Substrate ClassTough
Coat TypeCVD
Post TreatY

From Kennametal's website:

Coated carbide grade with CVD multilayer (TiN/TiCN/Al2O3) and advanced Beyond™ post-coat treatment. Substrate is very tough. KCPK30 has a wide application area in general and roughing milling of steels and cast irons. Performs best dry, but can also be used wet.

Application Range for KCPK30

Watch the Video:
"How to use the Carbide Grades Information"
and get the most out of this page!

Equivalent Grades for KCPK30

The most compatible grade from each brand!

A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to echo

Cutting Speed recommendations for KCPK30

How to use our Cutting Speeds Recommendations

  • Pay attention that your desired unit (SFM or m/min) is selected!
  • Speeds are given for stable conditions of Machine, Tool, and workpiece.
  • An empty cell means the grade is not available for the combination of material and application.
  • For more specific Cutting Speeds Recommendations use our advanced

Unit Selector:

SFM m/min
Scroll to Top