- Application Range
- Compatible Grades
- Cutting Speeds
Tungaloy - AH120 Menu
| General Information: | ||
|---|---|---|
| Brand | Tungaloy | |
| Grade Status | Primary | |
| Applications | Milling | |
| Substrate Class | Semi Tough | |
| Coat Type | PVD | |
| Post Treat | N | |
From Tungaloy's website:
- Good balance between wear and fracture resistance - Suitable for machining steel, stainless steel, and cast iron
Application Range for AH120
* If you don't understand the below table? Read This Explanation to make the most out of it!
| ISO | Material Group | app | pmksort | App | Apps Range | 05 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P | Steel | M | 0 | Milling | P15 - P25 | P | P | P | ||||||
| M | Stainless Steel | M | 1 | Milling | M15 - M25 | M | M | M | ||||||
| K | Cast Iron | M | 2 | Milling | K15 - K30 | K | K | K | K | |||||
| S | Superalloys | M | 4 | Milling | S10 - S25 | S | S | S | S |
Equivalent Grades for AH120
The most compatible grade from each brand!
A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to AH120
| Brand | Application | Grade | Substrate | Coating | Gscore |
|---|---|---|---|---|---|
| Sandvik | Milling | GC1040 | Semi Tough | Thin PVD | 85% |
| Iscar | Milling | IC830 | Tough | PVD | 90% |
| Kennametal | Milling | KCSM40 | Tough | PVD | 95% |
| Walter | Milling | WSM35S | Semi Tough | PVD | 100% |
| Seco | Milling | MS2050 | Semi Tough | Thin PVD | 90% |
| Mitsubishi | Milling | MP9130 | Semi Tough | PVD | 95% |
| Sumitomo | Milling | ACM300 | Semi Tough | Thin PVD | 90% |
Cutting Speed recommendations for AH120
How to use our Cutting Speeds Recommendations
- Pay attention that your desired unit (SFM or m/min) is selected!
- Speeds are given for stable conditions of Machine, Tool, and workpiece.
- An empty cell means the grade is not available for the combination of material and application.
- For more specific Cutting Speeds Recommendations use our advanced
SPEEDS AND FEEDS CALCULATOR
Unit Selector:
SFM
m/min
| uid | _ | Material Group | Turning (m/min) | Turning (SFM) | Parting (m/min) | Parting (SFM) | Grooving (m/min) | Grooving (SFM) | Milling (m/min) | Milling (SFM) | Driiling (mm/min) | Drilling (SFM) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| s6473fbb53e6f | P | Free-Cut Steel | - | - | - | - | - | - | 200 - 390 | 610 - 1180 | - | - |
| s6473fbb53e6f | P | Low Carbon Steel (0.1-0.25%) | - | - | - | - | - | - | 185 - 230 | 560 - 700 | - | - |
| s6473fbb53e6f | P | Carbon Steel (0.26-0.50%) | - | - | - | - | - | - | 160 - 230 | 480 - 700 | - | - |
| s6473fbb53e6f | P | High Carbon Steel (0.51-1.0%) | - | - | - | - | - | - | 130 - 160 | 390 - 480 | - | - |
| s6473fbb53e6f | P | Low Alloyed Steel (180 HB Max) | - | - | - | - | - | - | 200 - 240 | 610 - 730 | - | - |
| s6473fbb53e6f | P | Low Alloyed Steel (180-275 HB) | - | - | - | - | - | - | 115 - 200 | 350 - 610 | - | - |
| s6473fbb53e6f | P | Low Alloyed Steel (275 -350 HB) | - | - | - | - | - | - | 70 - 115 | 210 - 350 | - | - |
| s6473fbb53e6f | P | Tool Steel and High Alloy Steel (Annealed) | - | - | - | - | - | - | 65 - 160 | 190 - 480 | - | - |
| s6473fbb53e6f | P | Tool Steel and High Alloy Steel (250-300 HB) | - | - | - | - | - | - | 50 - 115 | 150 - 350 | - | - |
| s6473fbb53e6f | M | Ferritic Stainless Steel | - | - | - | - | - | - | 100 - 255 | 300 - 770 | - | - |
| s6473fbb53e6f | M | Martensitic Stainless Steel | - | - | - | - | - | - | 100 - 155 | 300 - 470 | - | - |
| s6473fbb53e6f | M | Austenitic Stainless Steel | - | - | - | - | - | - | 100 - 125 | 300 - 380 | - | - |
| s6473fbb53e6f | M | Duplex Stainless Steel | - | - | - | - | - | - | 30 - 85 | 90 - 250 | - | - |
| s6473fbb53e6f | M | Precipitation Hardening St. St. | - | - | - | - | - | - | 110 - 140 | 330 - 420 | - | - |
| s6473fbb53e6f | K | Grey Cast Iron (180 HB Max) | - | - | - | - | - | - | 165 - 225 | 500 - 680 | - | - |
| s6473fbb53e6f | K | Grey Cast Iron (180-260 HB) | - | - | - | - | - | - | 100 - 180 | 300 - 540 | - | - |
| s6473fbb53e6f | K | Nodular cast iron (160 HB Max) | - | - | - | - | - | - | 165 - 245 | 500 - 740 | - | - |
| s6473fbb53e6f | K | Nodular cast iron (180-280 HB) | - | - | - | - | - | - | 70 - 160 | 210 - 480 | - | - |
| s6473fbb53e6f | K | Malleable cast iron (180 HB Max) | - | - | - | - | - | - | 155 - 235 | 470 - 710 | - | - |
| s6473fbb53e6f | K | Malleable cast iron (180-270 HB) | - | - | - | - | - | - | 70 - 155 | 210 - 470 | - | - |
| s6473fbb53e6f | S | Iron (Fe) Based - Supper Alloys | - | - | - | - | - | - | 70 - 135 | 210 - 410 | - | - |
| s6473fbb53e6f | S | Nickel (Ni) Based - Supper Alloys (20 HRC Max | - | - | - | - | - | - | 40 - 120 | 120 - 360 | - | - |
| s6473fbb53e6f | S | Nickel (Ni) Based - Supper Alloys (21-42 HRC) | - | - | - | - | - | - | 25 - 50 | 70 - 150 | - | - |
| s6473fbb53e6f | S | Cobalt (Co) Based - Supper Alloys | - | - | - | - | - | - | 15 - 50 | 40 - 150 | - | - |
| s6473fbb53e6f | S | Pure Titaium | - | - | - | - | - | - | 75 - 125 | 220 - 380 | - | - |
| s6473fbb53e6f | S | Titanium alloys | - | - | - | - | - | - | 40 - 80 | 120 - 240 | - | - |
