- Application Range
- Compatible Grades
- Cutting Speeds
Seco - T350M Menu
General Information: | ||
---|---|---|
Brand | Seco | |
Grade Status | Primary | |
Applications | Milling / Parting | |
Substrate Class | Tough | |
Coat Type | CVD | |
Post Treat | N |
From Seco's website:
CVD-coated grade as basic choice for difficult stainless steel and an alternative in difficult operations in steel. Ti (C, N) – Al2O3
Application Range for T350M
Watch the Video:
"How to use the Carbide Grades Information"
and get the most out of this page!
Watch the Video:
"How to use the Carbide Grades Information"
and get the most out of this page!
ISO | Material Group | app | pmksort | App | Apps Range | 05 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
M | M - Stainless Steel | M | 1 | Milling | M20 - M40 | M | M | M | M | M | ||||
P | P - Steel | P | 0 | Parting | P25 - P45 | P | P | P | P | P | ||||
M | M - Stainless Steel | P | 1 | Parting | M20 - M40 | M | M | M | M | M | ||||
S | S - Superalloys | P | 4 | Parting | S10 - S30 | S | S | S | S | S |
Equivalent Grades for T350M
The most compatible grade from each brand!
A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to echo
Brand | Application | Grade | Substrate | Coating | Gscore |
---|---|---|---|---|---|
Sandvik | Milling | GC4340 | Tough | CVD | 100% |
Iscar | Milling | IC330 | Semi Tough | PVD | 70% |
Kennametal | Milling | KCPK30 | Tough | CVD | 100% |
Walter | Milling | WKP25S | Tough | CVD | 95% |
Tungaloy | Milling | T3130 | Tough | CVD | 100% |
Mitsubishi | Milling | MP7140 | Tough | PVD | 70% |
Sumitomo | Milling | ACP100 | Semi Tough | CVD | 95% |
Sandvik | Parting | GC1145 | Semi Tough | PVD | 65% |
Iscar | Parting | IC5400 | Tough | CVD | 90% |
Walter | Parting | WKP33S | Tough | CVD | 95% |
Tungaloy | Parting | GH130 | Semi Tough | PVD | 65% |
Mitsubishi | Parting | VP30RT | Semi Tough | PVD | 65% |
Sumitomo | Parting | AC830P | Tough | CVD | 95% |
Cutting Speed recommendations for T350M
How to use our Cutting Speeds Recommendations
- Pay attention that your desired unit (SFM or m/min) is selected!
- Speeds are given for stable conditions of Machine, Tool, and workpiece.
- An empty cell means the grade is not available for the combination of material and application.
- For more specific Cutting Speeds Recommendations use our advanced
SPEEDS AND FEEDS CALCULATOR
Unit Selector:
SFM
m/min
uid | _ | Material Group | Turning (m/min) | Turning (SFM) | Milling (m/min) | Milling (SFM) | Parting (m/min) | Parting (SFM) | Grooving (m/min) | Grooving (SFM) | Driiling (mm/min) | Drilling (SFM) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
s6626e946f3cb | P | Free Cutting Steel | - | - | - | - | 145 - 285 | 440 - 860 | - | - | - | - |
s6626e946f3cb | P | Low Carbon Steel (0.1-0.25%) | - | - | - | - | 135 - 170 | 410 - 510 | - | - | - | - |
s6626e946f3cb | P | Carbon Steel (0.26-0.50%) | - | - | - | - | 115 - 170 | 350 - 510 | - | - | - | - |
s6626e946f3cb | P | High Carbon Steel (0.51-1.0%) | - | - | - | - | 95 - 115 | 280 - 350 | - | - | - | - |
s6626e946f3cb | P | High Carbon Steel (0.51-1.0%) | - | - | - | - | 95 - 115 | 280 - 350 | - | - | - | - |
s6626e946f3cb | P | Low Alloyed Steel (180 HB Max) | - | - | - | - | 145 - 175 | 440 - 530 | - | - | - | - |
s6626e946f3cb | P | Low Alloyed Steel (180-275 HB) | - | - | - | - | 85 - 145 | 250 - 440 | - | - | - | - |
s6626e946f3cb | P | Low Alloyed Steel (275 -350 HB) | - | - | - | - | 55 - 85 | 160 - 250 | - | - | - | - |
s6626e946f3cb | P | Low Alloyed Steel (275 -350 HB) | - | - | - | - | 55 - 85 | 160 - 250 | - | - | - | - |
s6626e946f3cb | P | Tool Steel and High Alloy Steel (Annealed) | - | - | - | - | 50 - 115 | 150 - 350 | - | - | - | - |
s6626e946f3cb | P | Tool Steel and High Alloy Steel (250-300 HB) | - | - | - | - | 35 - 85 | 100 - 250 | - | - | - | - |
s6626e946f3cb | M | Ferritic Stainless Steel | - | - | - | - | 50 - 130 | 150 - 390 | - | - | - | - |
s6626e946f3cb | M | Martensitic Stainless Steel | - | - | - | - | 50 - 80 | 150 - 240 | - | - | - | - |
s6626e946f3cb | M | Austenitic Stainless Steel | - | - | - | - | 50 - 65 | 150 - 190 | - | - | - | - |
s6626e946f3cb | M | Duplex Stainless Steel | - | - | - | - | 15 - 45 | 40 - 130 | - | - | - | - |
s6626e946f3cb | M | Precipitation Hardening St. St. | - | - | - | - | 55 - 70 | 160 - 210 | - | - | - | - |
s6626e946f3cb | S | Iron (Fe) Based - Supper Alloys | - | - | - | - | - | - | - | - | - | - |
s6626e946f3cb | S | Iron (Fe) Based - Supper Alloys | - | - | - | - | - | - | - | - | - | - |
s6626e946f3cb | S | Nickel (Ni) Based - Supper Alloys (20 HRC Max | - | - | - | - | - | - | - | - | - | - |
s6626e946f3cb | S | Nickel (Ni) Based - Supper Alloys (21-42 HRC) | - | - | - | - | - | - | - | - | - | - |
s6626e946f3cb | S | Cobalt (Co) Based - Supper Alloys | - | - | - | - | - | - | - | - | - | - |
s6626e946f3cb | S | Pure Titanium | - | - | - | - | - | - | - | - | - | - |
s6626e946f3cb | S | Titanium alloys | - | - | - | - | - | - | - | - | - | - |