- Application Range
- Compatible Grades
- Cutting Speeds
Sandvik - GC1135 Menu
| General Information: | ||
|---|---|---|
| Brand | Sandvik | |
| Grade Status | Primary | |
| Applications | Parting | |
| Substrate Class | Semi Tough | |
| Coat Type | PVD | |
| Post Treat | N | |
From Sandvik's website:
CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts. Low to medium cutting speeds.
Application Range for GC1135
Watch the Video:
"How to use the Carbide Grades Information"
and get the most out of this page!
Watch the Video:
"How to use the Carbide Grades Information"
and get the most out of this page!
| ISO | Material Group | app | pmksort | App | Apps Range | 05 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P - Steel | P | 0 | Parting | P15 - P35 | P | P | P | P | P | ||||
| M | M - Stainless Steel | P | 1 | Parting | M20 - M40 | M | M | M | M | M | ||||
| K | K - Cast Iron | P | 2 | Parting | K20 - K40 | K | K | K | K | K |
Equivalent Grades for GC1135
The most compatible grade from each brand!
A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to echo
| Brand | Application | Grade | Substrate | Coating | Gscore |
|---|---|---|---|---|---|
| Iscar | Parting | IC830 | Semi Tough | PVD | 95% |
| Kennametal | Parting | KCU25 | Semi Hard | PVD | 85% |
| Walter | Parting | WSM33S | Semi Tough | PVD | 95% |
| Seco | Parting | CP600 | Semi Tough | PVD | 90% |
| Tungaloy | Parting | AH7025 | Semi Hard | PVD | 90% |
| Mitsubishi | Parting | VP30RT | Semi Tough | PVD | 90% |
| Sumitomo | Parting | AC1030U | Semi Hard | PVD | 90% |
Cutting Speed recommendations for GC1135
How to use our Cutting Speeds Recommendations
- Pay attention that your desired unit (SFM or m/min) is selected!
- Speeds are given for stable conditions of Machine, Tool, and workpiece.
- An empty cell means the grade is not available for the combination of material and application.
- For more specific Cutting Speeds Recommendations use our advanced
SPEEDS AND FEEDS CALCULATOR
Unit Selector:
SFM
m/min
| uid | _ | Material Group | Turning (m/min) | Turning (SFM) | Milling (m/min) | Milling (SFM) | Parting (m/min) | Parting (SFM) | Grooving (m/min) | Grooving (SFM) | Driiling (mm/min) | Drilling (SFM) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| s6626c230ecf4 | P | Free Cutting Steel | - | - | - | - | 125 - 245 | 380 - 740 | - | - | - | - |
| s6626c230ecf4 | P | Low Carbon Steel (0.1-0.25%) | - | - | - | - | 115 - 145 | 350 - 440 | - | - | - | - |
| s6626c230ecf4 | P | Carbon Steel (0.26-0.50%) | - | - | - | - | 100 - 145 | 300 - 440 | - | - | - | - |
| s6626c230ecf4 | P | High Carbon Steel (0.51-1.0%) | - | - | - | - | 80 - 100 | 240 - 300 | - | - | - | - |
| s6626c230ecf4 | P | High Carbon Steel (0.51-1.0%) | - | - | - | - | 80 - 100 | 240 - 300 | - | - | - | - |
| s6626c230ecf4 | P | Low Alloyed Steel (180 HB Max) | - | - | - | - | 125 - 150 | 380 - 450 | - | - | - | - |
| s6626c230ecf4 | P | Low Alloyed Steel (180-275 HB) | - | - | - | - | 70 - 125 | 210 - 380 | - | - | - | - |
| s6626c230ecf4 | P | Low Alloyed Steel (275 -350 HB) | - | - | - | - | 45 - 70 | 130 - 210 | - | - | - | - |
| s6626c230ecf4 | P | Low Alloyed Steel (275 -350 HB) | - | - | - | - | 45 - 70 | 130 - 210 | - | - | - | - |
| s6626c230ecf4 | P | Tool Steel and High Alloy Steel (Annealed) | - | - | - | - | 40 - 100 | 120 - 300 | - | - | - | - |
| s6626c230ecf4 | P | Tool Steel and High Alloy Steel (250-300 HB) | - | - | - | - | 30 - 70 | 90 - 210 | - | - | - | - |
| s6626c230ecf4 | M | Ferritic Stainless Steel | - | - | - | - | 50 - 135 | 150 - 410 | - | - | - | - |
| s6626c230ecf4 | M | Martensitic Stainless Steel | - | - | - | - | 50 - 80 | 150 - 240 | - | - | - | - |
| s6626c230ecf4 | M | Austenitic Stainless Steel | - | - | - | - | 50 - 65 | 150 - 190 | - | - | - | - |
| s6626c230ecf4 | M | Duplex Stainless Steel | - | - | - | - | 15 - 45 | 40 - 130 | - | - | - | - |
| s6626c230ecf4 | M | Precipitation Hardening St. St. | - | - | - | - | 60 - 75 | 180 - 220 | - | - | - | - |
| s6626c230ecf4 | K | Grey Cast Iron (180 HB Max) | - | - | - | - | 100 - 135 | 300 - 410 | - | - | - | - |
| s6626c230ecf4 | K | Grey Cast Iron (180-260 HB) | - | - | - | - | 60 - 105 | 180 - 320 | - | - | - | - |
| s6626c230ecf4 | K | Nodular cast iron (160 HB Max) | - | - | - | - | 100 - 145 | 300 - 440 | - | - | - | - |
| s6626c230ecf4 | K | Nodular cast iron (180-280 HB) | - | - | - | - | 40 - 95 | 120 - 280 | - | - | - | - |
| s6626c230ecf4 | K | Malleable cast iron (180 HB Max) | - | - | - | - | 95 - 140 | 280 - 420 | - | - | - | - |
| s6626c230ecf4 | K | Malleable cast iron (180-270 HB) | - | - | - | - | 40 - 95 | 120 - 280 | - | - | - | - |
