- Application Range
- Compatible Grades
- Cutting Speeds
Sumitomo - AC510U Menu
| General Information: | ||
|---|---|---|
| Brand | Sumitomo | |
| Grade Status | Old Version | |
| Substrate Class | Very Hard | |
| Coat Type | PVD | |
| Post Treat | N | |
OLD GRADE NOTICE!
AC510U is an older generation grade that is no longer recomended by Sumitomo
The recomended modern alternative is :AC5005S
The data below is the data for AC5005S However, It should be fairly accurate also for AC510U
From Sumitomo's website:
High-speed, high-efficiency grade with great high-temperature strength, which realises excellent wear resistance in high-efficiency machining.
Application Range for AC5005S (AC510U)
Equivalent Grades for AC5005S (AC510U)
The most compatible grade from each brand!
A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to echo
Cutting Speed recommendations for AC5005S (AC510U)
How to use our Cutting Speeds Recommendations
- Pay attention that your desired unit (SFM or m/min) is selected!
- Speeds are given for stable conditions of Machine, Tool, and workpiece.
- An empty cell means the grade is not available for the combination of material and application.
- For more specific Cutting Speeds Recommendations use our advanced
SPEEDS AND FEEDS CALCULATOR
Unit Selector:
SFM
m/min
