- Application Range
- Compatible Grades
- Cutting Speeds
Iscar - IC428 Menu
General Information: | ||
---|---|---|
Brand | Iscar | |
Grade Status | Old Version | |
Substrate Class | Semi Hard | |
Coat Type | CVD | |
Post Treat | N |
OLD GRADE NOTICE!
IC428 is an older generation grade that is no longer recomended by Iscar
The recomended modern alternative is :IC5010
The data below is the data for IC5010 However, It should be fairly accurate also for IC428
From Iscar's website:
A hard substrate, improved MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended mainly for grey cast iron at stable or slightly unstable conditions. Can be used successfully also on nodular cast iron.
Application Range for IC5010 (IC428)
Equivalent Grades for IC5010 (IC428)
The most compatible grade from each brand!
A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to echo
Cutting Speed recommendations for IC5010 (IC428)
How to use our Cutting Speeds Recommendations
- Pay attention that your desired unit (SFM or m/min) is selected!
- Speeds are given for stable conditions of Machine, Tool, and workpiece.
- An empty cell means the grade is not available for the combination of material and application.
- For more specific Cutting Speeds Recommendations use our advanced
SPEEDS AND FEEDS CALCULATOR
Unit Selector: