13/16 - 12 12-UN - Basic Thread Dimensions

Property Inch mm
Nominal Diameter 0.812 20.625
Pitch (TPI)12
Pitch (Distance) 0.0833 2.116
Pitch Diameter 0.7579 19.251
Minor Diameter 0.7128 18.105
Thread Height 0.0451 1.146
Addendum 0.0271 0.688
Crest (External)
Root (Internal)		 0.0104 0.264
Tap Drill Size
(75% depth)		 0.731 18.56
Lead Angle
(Single Start)		 2°
Thread Family Unified Constant Pitch 6 TPI (12-UN)
Relevant Standards ASME B1.1-2003
Equivalent Metric ThreadM20 X 2

For more threading data scroll down, or use the Thread Calculator

Table of Content

13/16 - 12 12-UN Possible Thread Classes

External Threads

Choose tolerance class: 2A, 3A

Metric ISO External Thread - Tolerance sketch

Internal Threads

Choose tolerance class: 2B, 3B

Metric ISO Internal Thread - Tolerance sketch

13/16 - 12 12-UN 2A (External)

* Permisable values for thread Class 2A

# Description Value (Inch) Value (mm)
es Allowance 0.0016 (Ref) 0.041 (Ref)
d Major Diameter 0.799 - 0.8104 20.295 - 20.584
d2 Pitch Diameter 0.7511 - 0.7563 19.078 - 19.21
d3 Minor Diameter
(UNR Only)		 0.7112 (Ref) 18.064 (Ref)
α Varation of 30° anngle (+/-) 0.9167°
P Varation of pitch (+/-) 0.0015 (Ref) 0.038 (Ref)

* Values are calculated for Length of engagement of 5xPitch. For calculations of different engagement length use the Thread Calculator

* Back to Thread Class Selection

13/16 - 12 12-UN 3A (External)

* Permisable values for thread Class 3A

# Description Value (Inch) Value (mm)
es Allowance 0 (Ref) 0 (Ref)
d Major Diameter 0.8006 - 0.812 20.335 - 20.625
d2 Pitch Diameter 0.754 - 0.7579 19.152 - 19.251
d3 Minor Diameter
(UNR Only)		 0.7128 (Ref) 18.105 (Ref)
α Varation of 30° anngle (+/-) 0.9167°
P Varation of pitch (+/-) 0.0011 (Ref) 0.028 (Ref)

* Values are calculated for Length of engagement of 5xPitch. For calculations of different engagement length use the Thread Calculator

* Back to Thread Class Selection

13/16 - 12 12-UN 2B (Internal)

* Permisable values for thread Class 2B

# Description Value (Inch) Value (mm)
D1 Minor Diameter 0.722 - 0.74 18.339 - 18.796
D2 Pitch Diameter 0.7579 - 0.7647 19.251 - 19.423
D Major Diameter 0.8120 (Min) 20.625 (Min)
α Varation of 30° anngle (+/-) 0.9167°
P Varation of Pitch (+/-) 0.002 (Ref) 0.051 (Ref)

* Values are calculated for Length of engagement of 5xPitch. For calculations of different engagement length use the Thread Calculator

* Back to Thread Class Selection

13/16 - 12 12-UN 3B (Internal)

* Permisable values for thread Class 3B

# Description Value (Inch) Value (mm)
D1 Minor Diameter 0.7218 - 0.7324 18.334 - 18.603
D2 Pitch Diameter 0.7579 - 0.763 19.251 - 19.38
D Major Diameter 0.8120 (Min) 20.625 (Min)
α Varation of 30° anngle (+/-) 0.9167°
P Varation of Pitch (+/-) 0.0015 (Ref) 0.038 (Ref)

* Values are calculated for Length of engagement of 5xPitch. For calculations of different engagement length use the Thread Calculator

* Back to Thread Class Selection

Tap Drill Sizes for 13/16 - 12 12-UN

  • If not specified, assume a thread depth of 75%.
  • You can learn more about thread depth in tapping here.
  • To get the tap drill size in other depths, use our Tap Drill Size Calculator .
Thread Depth Tap Drill Size (Inch) Tap Drill Size (mm)
55% 0.752 19.11
60% 0.747 18.97
65% 0.742 18.84
70% 0.736 18.70
75% 0.731 18.56
80% 0.725 18.42
85% 0.720 18.29

Over Wire Measurements for 13/16 - 12 12-UN


* OverWire is a measuring method to obatin the pitch diameter of threads. It is mostly used when a manufacturer does not have a Go/Nogo gauge for a thread. You can learn more about it here

Inch mm
Permissible Wire Diameter Range 0.0421 - 0.0842 1.069 - 2.138
Ideal Wire Diameter 0.0481 1.222
Possible Wires
From Standard Sets		 * 0.0642
* 0.0722
* 0.077
* 0.0825
 * 1.155
* 1.443
* 1.732
* 2.021

Once you knoe your wire diameter, you need to find out what is the premissable Measurement for your pitch diameter (Depending on the class). Use our Over Wire Calculator to find out!


Scroll to Top