Thread data sheet

Basic Thread Dimensions

Property mm Inch
Nominal Diameter 1.2 0.0472
Pitch (Distance) 0.2 0.0079
Pitch Diameter 1.07 0.0421
Minor Diameter 0.983 0.0387
Thread Height 0.108 0.0043
Addendum 0.065 0.0026
Crest (External)
Root (Internal)
0.025 0.001
Tap Drill Size
(75% depth)
1.01 0.04
Lead Angle
(Single Start)
3.4°
Thread Family Metric Fine Pitch (MF)
Relevant Standards ISO 68-1, ISO 9651-1, ISO 965-2, ISO 261,DIN 13
Equivalent InchThread#0 - 80 UNF

For more threading data scroll down, or use the Thread Calculator

Choose the Threading Data you want to explore


M1.2 X 0.2Possible Thread Classes

External Threads

4g, 4h, 6g, 6h, 5g4g, 5h4h, 5g6g

Metric ISO External Thread - Tolerance sketch

Internal Threads

4H

Metric ISO Internal Thread - Tolerance sketch

M1.2 X 0.2 4g (External)

* Permisable values for thread Class 4g

# Description Value (mm) Value (Inch)
es Allowance 0.017 (Ref) 0.0007 (Ref)
d Major Diameter 1.147 - 1.183 0.0452 - 0.0466
d2 Pitch Diameter 1.023 - 1.053 0.0403 - 0.0415
R Root Radius 0.025 (Min) 0.001 (Min)
C Root Truncation 0.025 - 0.058 0.001 - 0.0023
LE Normal Length of Engagement 0.5 - 1.4 0.0197 - 0.0551

* Back to Thread Class Selection


M1.2 X 0.2 4h (External)

* Permisable values for thread Class 4h

# Description Value (mm) Value (Inch)
es Allowance 0 (Ref) 0 (Ref)
d Major Diameter 1.164 - 1.2 0.0458 - 0.0472
d2 Pitch Diameter 1.04 - 1.07 0.0409 - 0.0421
R Root Radius 0.025 (Min) 0.001 (Min)
C Root Truncation 0.025 - 0.058 0.001 - 0.0023
LE Normal Length of Engagement 0.5 - 1.4 0.0197 - 0.0551

* Back to Thread Class Selection


M1.2 X 0.2 6g (External)

* Permisable values for thread Class 6g

# Description Value (mm) Value (Inch)
es Allowance 0.017 (Ref) 0.0007 (Ref)
d Major Diameter 1.127 - 1.183 0.0444 - 0.0466
d2 Pitch Diameter 1.005 - 1.053 0.0396 - 0.0415
R Root Radius 0.025 (Min) 0.001 (Min)
C Root Truncation 0.025 - 0.067 0.001 - 0.0026
LE Normal Length of Engagement 0.5 - 1.4 0.0197 - 0.0551

* Back to Thread Class Selection


M1.2 X 0.2 6h (External)

* Permisable values for thread Class 6h

# Description Value (mm) Value (Inch)
es Allowance 0 (Ref) 0 (Ref)
d Major Diameter 1.144 - 1.2 0.045 - 0.0472
d2 Pitch Diameter 1.022 - 1.07 0.0402 - 0.0421
R Root Radius 0.025 (Min) 0.001 (Min)
C Root Truncation 0.025 - 0.067 0.001 - 0.0026
LE Normal Length of Engagement 0.5 - 1.4 0.0197 - 0.0551

* Back to Thread Class Selection


M1.2 X 0.2 5g4g (External)

* Permisable values for thread Class 5g4g

# Description Value (mm) Value (Inch)
es Allowance 0.017 (Ref) 0.0007 (Ref)
d Major Diameter 1.147 - 1.183 0.0452 - 0.0466
d2 Pitch Diameter 1.015 - 1.053 0.04 - 0.0415
R Root Radius 0.025 (Min) 0.001 (Min)
C Root Truncation 0.025 - 0.062 0.001 - 0.0024
LE Normal Length of Engagement 0.5 - 1.4 0.0197 - 0.0551

* Back to Thread Class Selection


M1.2 X 0.2 5h4h (External)

* Permisable values for thread Class 5h4h

# Description Value (mm) Value (Inch)
es Allowance 0 (Ref) 0 (Ref)
d Major Diameter 1.164 - 1.2 0.0458 - 0.0472
d2 Pitch Diameter 1.032 - 1.07 0.0406 - 0.0421
R Root Radius 0.025 (Min) 0.001 (Min)
C Root Truncation 0.025 - 0.062 0.001 - 0.0024
LE Normal Length of Engagement 0.5 - 1.4 0.0197 - 0.0551

* Back to Thread Class Selection


M1.2 X 0.2 5g6g (External)

* Permisable values for thread Class 5g6g

# Description Value (mm) Value (Inch)
es Allowance 0.017 (Ref) 0.0007 (Ref)
d Major Diameter 1.127 - 1.183 0.0444 - 0.0466
d2 Pitch Diameter 1.015 - 1.053 0.04 - 0.0415
R Root Radius 0.025 (Min) 0.001 (Min)
C Root Truncation 0.025 - 0.062 0.001 - 0.0024
LE Normal Length of Engagement 0.5 - 1.4 0.0197 - 0.0551

* Back to Thread Class Selection


M1.2 X 0.2 4H (Internal)

* Permisable values for thread Class 4H

# Description Value (mm) VValue (Inch)
EL Allowance 0 (Ref) 0 (Ref)
D1 Minor Diameter 0.983 - 1.021 0.0387 - 0.0402
D2 Pitch Diameter 1.07 - 1.11 0.0421 - 0.0437
D Major Diameter 1.2 (Min) 0.0472 (Min)
LE Normal Length of Engagement 0.5 - 1.4 0.0197 - 0.0551

* Back to Thread Class Selection


Tap Drill Sizes for M1.2 X 0.2

  • If not specified, assume a thread depth of 75%.
  • You can learn more about thread depth in tapping here.
  • To get the tap drill size in other depths, use our Tap Drill Size Calculator .
Thread Depth Tap Drill Size (Inch) Tap Drill Size (mm)
55% 0.042 1.06
60% 0.041 1.04
65% 0.041 1.03
70% 0.040 1.02
75% 0.040 1.01
80% 0.039 0.99
85% 0.039 0.98

Over Wire Measurements for M1.2 X 0.2


* OverWire is a measuring method to obatin the pitch diameter of threads. It is mostly used when a manufacturer does not have a Go/Nogo gauge for a thread. You can learn more about it here

mm Inch
Permissible Wire Diameter Range 0.101 - 0.202 0.004 - 0.008
Ideal Wire Diameter 0.115 0.0045
Possible Wires
From Standard Sets
* 0.116
* 0.13
* 0.144
* 0.173
* 0.006
* 0.0064
* 0.0072

Once you know your wire diameter, you need to find out what is the premissable Measurement for your pitch diameter (Depending on the class). Use our Over Wire Calculator to find out!


CNC Gcode Program for Turning of M1.2 X 0.2

The below sample Gcode is configured for:

  • Fanuc Controller
  • External RH Thread
  • Right hand tool, machining towards the chuck
  • Flank Infeed method with contant volume
  • Flank Infeed method with contant volume
  • Cutting conditions for steel
  • Default number of passes

You can configure all the above parameters and much more in our Thread Turning Gcode Generator


%
O0100
(MACHINING DOCTOR - THREADING CNC PROGRAM)
(CONTROLER - FANUC A)
(THREAD - )
(D=1.2 MM, P=0.2 MM, L=2 MM)
(APPLICATION - EXTERNAL TURNING, TOWARDS CHUCK, RH TOOL, RH THREAD)
(FEED - 3 PASSES, FLANK, CONSTANT VOLUME)
(FINISH PASS - 0.01 MM)
(WITH CHAMFER -  NO)
G28 U0
G28 U0
T0100
G99 G97 S5000 M03
G00 Z5.0
G00 X3.2 M08
G76 P010060 Q10 R0
G76 X1 Z-2 P123 Q65 F0 R
G28 U0
G28 U0
M09
M30
(PLEASE NOTE THIS GCODE HAS NOT BEEN TESTED ON YOUR MACHINE AND SETUP. WE CANNOT GUARANTEE ITS ACCURACY OR COMPATIBILITY. NOTE THAT YOU ARE USING IT AT YOUR OWN RISK, AND WE SHALL NOT BE HELD LIABLE FOR ANY DAMAGES OR LOSSES ARISING FROM THE USE OF THIS PROGRAM.)
%

CNC Gcode Program for Thread Milling of M1.2 X 0.2

The below sample Gcode is configured for:

  • Fanuc Controller
  • Internal RH Thread
  • Climb Milling
  • Cutter diameter: 70% of the thread diameter
  • Single tooth Thread Mill cutter
  • Cutting conditions for steel
  • One radial pass

You can configure all the above parameters and much more in our Thread Milling Gcode Generator


%
O0101
(WWW.MACHININGDOCTOR.COM - THREADMILLING PROGRAM)
(CONTROLER - FANUC)
(THREAD - MAJOR DIAM.=1.2 MM, PITCH=0.2 MM, LENGTH=2 MM)
(APPLICATION - INTERNAL, RH THREAD, CLIMB MILLING)
(CUTTER DIAM=0.6 [SINGLE TOOTH])
(CUTTER COMPENSATION D=0 - TOOLPATH FOR TOOL CENTER)
N1 M06 T1
G54
G90 G40 G17 G94 G21
G00 X0 Y0 S10000 M03
G43 H1 Z20.0 M08
(M-CODE "THROUGH COOLANT ON")
(PASS 1 / 1)
G90 G01 Z-2.025 F2000
G91 G01 G41 D1 X0.15 Y-0.15 F1500
G03 X0.15 Y0.15 Z0.025 I0 J0.15 F375
G03 Z0.2 I-0.3 J0 F750
G03 Z0.2 I-0.3 J0
G03 Z0.2 I-0.3 J0
G03 Z0.2 I-0.3 J0
G03 Z0.2 I-0.3 J0
G03 Z0.2 I-0.3 J0
G03 Z0.2 I-0.3 J0
G03 Z0.2 I-0.3 J0
G03 Z0.2 I-0.3 J0
G03 Z0.2 I-0.3 J0
G03 X-0.15 Y0.15 Z0.025 I-0.15 J0
G01 G40 X-0.15 Y-0.15 F2000
G90 G00 Z20.0
M30
(PLEASE NOTE THIS GCODE HAS NOT BEEN TESTED ON YOUR MACHINE AND SETUP. WE CANNOT GUARANTEE ITS ACCURACY OR COMPATIBILITY. NOTE THAT YOU ARE USING IT AT YOUR OWN RISK, AND WE SHALL NOT BE HELD LIABLE FOR ANY DAMAGES OR LOSSES ARISING FROM THE USE OF THIS PROGRAM.)
%
Scroll to Top