ACME Thread data sheet

0.5-10 ACME - Basic Thread Dimensions

Property Inch mm
Major Diameter (D) 0.5 12.7
Pitch (TPI) (P) 10 10
Pitch (Distance) (P) 0.1 2.54
Pitch Diameter (D2) 0.45 11.43
Minor Diameter (D1) 0.4 10.16
Thread Height (h) 0.05 1.27
Flat Width (F) 0.0371 0.942
Profile V Angle (2 X α) 29° 29°
Lead Angle (λ) 4.046° 4.046°
Tap Drill Size (Dt) 0.4 10.16
Thread Family Leadscrew Inch Thread (ACME)
Relevant Standards ASME B1.5

For more threading data scroll down, or use the ACME Thread Calculator 

Table of Content

0.5-10 ACME Possible Thread Classes

The data listed below is valid only for Single Start Threads and engagement lengthsup to 1 For Multiple Starts and large LE's use our ACME Thread Calculator 

External Threads

Choose tolerance class

2G, 3G, 4G, 2C, 3C, 4C

Acme External Thread - Tolerance sketch

Internal Threads

_e("Choose tolerance class","md_acme");

2G, 3G, 4G, 2C, 3C, 4C

ACME Internal Thread - Tolerance sketch

1/2 - 10 ACME 2G (External)

* Permisable values forthread Class 2G

# Description Value (Inch) Value (mm)
d Major Diameter 0.495 - 0.5 12.573 - 12.7
d2 Pitch Diameter 0.4306 - 0.4443 10.937 - 11.285
d1 Minor Diameter 0.3594 - 0.38 9.129 - 9.652
P Varation of Pitch (+/-) 0.0006 0.015
α Varation of 14.5° anngle (+/-) 0.65°

* Back to Thread Class Selection

1/2 - 10 ACME 3G (External)

* Permisable values forthread Class 3G

# Description Value (Inch) Value (mm)
d Major Diameter 0.495 - 0.5 12.573 - 12.7
d2 Pitch Diameter 0.4394 - 0.4458 11.161 - 11.323
d1 Minor Diameter 0.3704 - 0.38 9.408 - 9.652
P Varation of Pitch (+/-) 0.0006 0.015
α Varation of 14.5° anngle (+/-) 0.65°

* Back to Thread Class Selection

1/2 - 10 ACME 4G (External)

* Permisable values forthread Class 4G

# Description Value (Inch) Value (mm)
d Major Diameter 0.495 - 0.5 12.573 - 12.7
d2 Pitch Diameter 0.4426 - 0.4472 11.242 - 11.359
d1 Minor Diameter 0.3731 - 0.38 9.477 - 9.652
P Varation of Pitch (+/-) 0.0006 0.015
α Varation of 14.5° anngle (+/-) 0.65°

* Back to Thread Class Selection

1/2 - 10 ACME 2C (External)

* Permisable values forthread Class 2C

# Description Value (Inch) Value (mm)
d Major Diameter 0.4975 - 0.5 12.637 - 12.7
d2 Pitch Diameter 0.4306 - 0.4443 10.937 - 11.285
d1 Minor Diameter 0.3594 - 0.38 9.129 - 9.652
P Varation of Pitch (+/-) 0.0006 0.015
α Varation of 14.5° anngle (+/-) 0.65°

* Back to Thread Class Selection

1/2 - 10 ACME 3C (External)

* Permisable values forthread Class 3C

# Description Value (Inch) Value (mm)
d Major Diameter 0.4989 - 0.5 12.672 - 12.7
d2 Pitch Diameter 0.4394 - 0.4458 11.161 - 11.323
d1 Minor Diameter 0.3704 - 0.38 9.408 - 9.652
P Varation of Pitch (+/-) 0.0006 0.015
α Varation of 14.5° anngle (+/-) 0.65°

* Back to Thread Class Selection

1/2 - 10 ACME 4C (External)

* Permisable values forthread Class 4C

# Description Value (Inch) Value (mm)
d Major Diameter 0.4993 - 0.5 12.682 - 12.7
d2 Pitch Diameter 0.4426 - 0.4472 11.242 - 11.359
d1 Minor Diameter 0.3731 - 0.38 9.477 - 9.652
P Varation of Pitch (+/-) 0.0006 0.015
α Varation of 14.5° anngle (+/-) 0.65°

* Back to Thread Class Selection

1/2 - 10 ACME 2G ( Internal)

* Permisable values for thread Class 2G

# Description Value () Value ()
D Major Diameter 0.52 - 0.54 13.208 - 13.716
D2 Pitch Diameter 0.45 - 0.4637 11.43 - 11.778
D1 Minor Diameter 0.4 - 0.405 10.16 - 10.287
P Varation of Pitch (+/-) 0.0006 (Ref) 0.015 (Ref)
α Varation of 14.5° anngle (+/-) 0.65 (Ref) 16.51 (Ref)

* Back to Thread Class Selection

1/2 - 10 ACME 3G ( Internal)

* Permisable values for thread Class 3G

# Description Value () Value ()
D Major Diameter 0.52 - 0.54 13.208 - 13.716
D2 Pitch Diameter 0.45 - 0.4564 11.43 - 11.593
D1 Minor Diameter 0.4 - 0.405 10.16 - 10.287
P Varation of Pitch (+/-) 0.0006 (Ref) 0.015 (Ref)
α Varation of 14.5° anngle (+/-) 0.65 (Ref) 16.51 (Ref)

* Back to Thread Class Selection

1/2 - 10 ACME 4G ( Internal)

* Permisable values for thread Class 4G

# Description Value () Value ()
D Major Diameter 0.52 - 0.54 13.208 - 13.716
D2 Pitch Diameter 0.45 - 0.4546 11.43 - 11.547
D1 Minor Diameter 0.4 - 0.405 10.16 - 10.287
P Varation of Pitch (+/-) 0.0006 (Ref) 0.015 (Ref)
α Varation of 14.5° anngle (+/-) 0.65 (Ref) 16.51 (Ref)

* Back to Thread Class Selection

1/2 - 10 ACME 2C ( Internal)

* Permisable values for thread Class 2C

# Description Value () Value ()
D Major Diameter 0.5007 - 0.5032 12.718 - 12.781
D2 Pitch Diameter 0.45 - 0.4637 11.43 - 11.778
D1 Minor Diameter 0.41 - 0.415 10.414 - 10.541
P Varation of Pitch (+/-) 0.0006 (Ref) 0.015 (Ref)
α Varation of 14.5° anngle (+/-) 0.65 (Ref) 16.51 (Ref)

* Back to Thread Class Selection

1/2 - 10 ACME 3C ( Internal)

* Permisable values for thread Class 3C

# Description Value () Value ()
D Major Diameter 0.5007 - 0.5032 12.718 - 12.781
D2 Pitch Diameter 0.45 - 0.4564 11.43 - 11.593
D1 Minor Diameter 0.41 - 0.415 10.414 - 10.541
P Varation of Pitch (+/-) 0.0006 (Ref) 0.015 (Ref)
α Varation of 14.5° anngle (+/-) 0.65 (Ref) 16.51 (Ref)

* Back to Thread Class Selection

1/2 - 10 ACME 4C ( Internal)

* Permisable values for thread Class 4C

# Description Value () Value ()
D Major Diameter 0.5007 - 0.5021 12.718 - 12.753
D2 Pitch Diameter 0.45 - 0.4546 11.43 - 11.547
D1 Minor Diameter 0.41 - 0.415 10.414 - 10.541
P Varation of Pitch (+/-) 0.0006 (Ref) 0.015 (Ref)
α Varation of 14.5° anngle (+/-) 0.65 (Ref) 16.51 (Ref)

* Back to Thread Class Selection

Over Wire Measurements for 0.5-10 ACME


* OverWire is a measuring method to obatin the pitch diameter of threads. It is mostly used when a manufacturer does not have a Go/Nogo gauge for a thread. You can learn more about it here

Inch mm
Permissible Wire Diameter Range 0.04906 - 0.07747 1.2462 - 1.9677
Ideal Wire Diameter 0.05165 1.3118
Possible Wires
From Standard Sets		 * 0.06415
* 0.07217
* 0.07698
 * 1.4434
* 1.7321

Once you know your wire diameter, you need to find out what is the premissable Measurement for your pitch diameter (Depending on the class). Use our Over Wire Calculator to find out!


Our Top Picks

Start typing and press enter to search

Scroll to Top