Hoja de datos de Mecanizado para

Aluminio 6061 Menú:

Normas equivalentes
Composición química
Recomendación de velocidades de corte
Calidades de metal duro recomendadas
Geometría de vanguardia

Información General:
Grupo de Material		N - No ferroso (Aluminio, Latón, Plástico)
Sub-Grupo		N/A
Dureza		95.0 HB
Resistencia a la tracción		300 [N/mm^2]
Maquinabilidad		270%

Designacion Internacional Equivalentes para Aluminio 6061

Estándar	Nombre
sae	6061
wnr	3.3211
din	AlMgSiCu
bs	H20
anfor	A-GSUC
uni	6170

Composición química para Aluminio 6061

Elemento	Cantidad
Magnesio (Mg)	0.8~1.2%
Hierro (Fe)	0.7%
Silicio (Si)	0.4~0.8%
Cobre (Cu)	0.15~0.40%
Zinc (Zn)	0.25%
Manganeso (Mn)	0.15%
Titanio (Ti)	0.15%
Aluminio (Al)	rem%

Recomendaciones de Velocidades de Corte para Aluminio 6061

* Clicke en las velocidades abajo para obtener una mayor precisión en condiciones específicas!

Aplicación	Vc (m/min)	Vc (SFM)
Torneado	510-690	1670-2260
Fresado	640-865	2100-2840
Tronzado	340-460	1120-1510
Ranurado	425-575	1390-1890
Taladrado	215-290	710-950

Important! La velocidad estimada es recomendada para una situación ideal:

La calidad de metal duro más adecuada
Sujeción estable de la herramienta
Sujeción estable de la pieza demecanizado
Material de buena calidad
Herramienta de corte con voladizo curto
Dureza nominal del material.
etc.

Clicke en las velocidades de la tabla para obtener mejor precisión para parámetros específicos
O utiliza nuestro Calculadora de Velocidad y Avance

Calidad Recomendada para Aluminio 6061

Torneado
Fresado (Indexable)
Tronzado
Ranurado

Calidad para Torneado

Filter Brand:

Brand	Grade	ISO	Material	app	App	Coating	Apps Range	05	10	15	20	25	30	35	40	45
Sandvik	H10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N05 - N30	N	N	N	N	N	N
Iscar	IC20	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N05 - N30	N	N	N	N	N	N
Kennametal	KC5410	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	PVD	N05 - N20	N	N	N	N
Kennametal	K313	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N10 - N35		N	N	N	N	N	N
Walter	WN10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N05 - N20	N	N	N	N
Seco	KX	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N05 - N30	N	N	N	N	N	N
Tungaloy	KS05F	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	uncoated	N05 - N10	N	N
Tungaloy	TH10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	uncoated	N10 - N20		N	N	N
Mitsubishi	HTI10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N05 - N30	N	N	N	N	N	N
Sumitomo	H1	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N10 - N30		N	N	N	N	N

Calidad para Fresado

Filter Brand:

Brand	Grade	ISO	Material	app	App	Coating	Apps Range	05	10	15	20	25	30	35	40	45
Sandvik	H10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N05 - N15	N	N	N
Sandvik	H13A	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N15 - N30			N	N	N	N
Iscar	IC08	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N05 - N20	N	N	N	N
Iscar	IC28	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N15 - N30			N	N	N	N
Kennametal	KC410M (KC510M)	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	PVD	N05 - N15	N	N	N
Kennametal	KC422M (KC522M)	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	PVD	N20 - N30				N	N	N
Walter	WXN15	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	PVD	N05 - N25	N	N	N	N	N
Seco	H15	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N05 - N20	N	N	N	N
Seco	H25	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N10 - N35		N	N	N	N	N	N
Mitsubishi	HTI10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N05 - N20	N	N	N	N
Mitsubishi	TF15	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N15 - N35			N	N	N	N	N
Sumitomo	DL2000	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	DLC	N05 - N30	N	N	N	N	N	N
Sumitomo	DL1000	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	DLC	N05 - N25	N	N	N	N	N
Sumitomo	H1	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N15 - N30			N	N	N	N
Sumitomo	H20	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N20 - N35				N	N	N	N

Calidad para Tronzado

Filter Brand:

Brand	Grade	ISO	Material	app	App	Coating	Apps Range	05	10	15	20	25	30	35	40	45
Sandvik	GC1105	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	PVD	N05 - N30	N	N	N	N	N	N
Sandvik	H10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	Uncoated	N10 - N30		N	N	N	N	N
Iscar	IC20	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	Uncoated	N05 - N30	N	N	N	N	N	N
Kennametal	KCU10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	PVD	N05 - N20	N	N	N	N
Kennametal	KCU25	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	PVD	N20 - N30				N	N	N
Walter	WN13	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	Uncoated	N05 - N20	N	N	N	N
Seco	HX	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	Uncoated	N10 - N30		N	N	N	N	N
Tungaloy	TH10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	uncoated	N10 - N20		N	N	N
Mitsubishi	HTI10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	Uncoated	N05 - N30	N	N	N	N	N	N

Calidad para Ranurado

Filter Brand:

Brand	Grade	ISO	Material	app	App	Coating	Apps Range	05	10	15	20	25	30	35	40	45
Sandvik	GC1125	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	PVD	N10 - N35		N	N	N	N	N	N
Sandvik	H10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	Uncoated	N10 - N30		N	N	N	N	N
Iscar	IC20	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	Uncoated	N05 - N30	N	N	N	N	N	N
Kennametal	K313	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	Uncoated	N10 - N30		N	N	N	N	N
Walter	WN13	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	Uncoated	N05 - N20	N	N	N	N
Seco	883	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	Uncoated	N05 - N30	N	N	N	N	N	N
Tungaloy	KS05F	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	uncoated	N05 - N10	N	N
Tungaloy	TH10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	uncoated	N10 - N20		N	N	N
Mitsubishi	HTI10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	Uncoated	N05 - N30	N	N	N	N	N	N

Geometría de filo de corte recomendada para Aluminio 6061

Tamaño del Honing:		0.00-0.01 mm / 0.000-0.000"
Angulo de Ataque:		15° -25°
Ángulo del terreno:		Positive
Anchura del terreno:		0.05-0.10 mm / 0.002-0.004"
Inserto Rectificado:		Highly Recommended
Superior pulida:		Recommended

Our Top Picks