ALTE SORTE BEACHTEN!
GC3334 gibt es, aber wird nicht empfohlen von Sandvik für jede Anwendung in ihren Katalogen
Die nachstehende Liste enthält die kompatibelsten modernen Sorten nach Sandvik
Eine Punktzahl (bis zu 100 %) zeigt die Kompatibilität des aufgeführten Sorten mitGC3334
| Brand | Grade | Application | Substrate | Coating | Score |
|---|---|---|---|---|---|
| Sandvik | GC1125 | Turning | Semi Hard | PVD | 85% |
| Sandvik | GC2035 | Turning | Semi Tough | PVD | 75% |
| Sandvik | GC1105 | Turning | Hard | PVD | 75% |
| Sandvik | GC1115 | Turning | Very Hard | PVD | 75% |
| Sandvik | GC3225 | Turning | Semi Tough | CVD | 70% |
| Sandvik | GC3210 | Turning | Hard | CVD | 65% |
| Sandvik | GC3205 | Turning | Hard | CVD | 60% |
| Sandvik | GC4415 | Turning | Semi Hard | CVD | 60% |
| Sandvik | H10 | Turning | Hard | Uncoated | 60% |
| Sandvik | GC4305 | Turning | Hard | CVD | 55% |
| Sandvik | GC4425 | Turning | Semi Tough | CVD | 55% |
| Sandvik | GC2015 | Turning | Semi Tough | CVD | 50% |
| Sandvik | GC2220 | Turning | Semi Tough | CVD | 50% |
| Brand | Grade | Application | Substrate | Coating | Score |
|---|---|---|---|---|---|
| Sandvik | S30T | Milling | Semi Hard | PVD | 90% |
| Sandvik | GC1020 | Milling | Hard | PVD | 85% |
| Sandvik | GC1040 | Milling | Semi Tough | PVD | 85% |
| Sandvik | GC1130 | Milling | Semi Hard | PVD | 85% |
| Sandvik | GC3330 | Milling | Semi Hard | CVD | 75% |
| Sandvik | GC1010 | Milling | Very Hard | PVD | 70% |
| Sandvik | H10 | Milling | Hard | Uncoated | 60% |
| Sandvik | H13A | Milling | Semi Hard | Uncoated | 60% |
| Sandvik | GC4330 | Milling | Tough | CVD | 55% |
| Sandvik | GC3040 | Milling | Tough | CVD | 50% |
| Sandvik | GC4340 | Milling | Tough | CVD | 50% |
| Sandvik | S40T | Milling | Tough | CVD | 50% |
