- Application Range
- Compatible Grades
- Cutting Speeds
Sandvik - GC1115 Menu
General Information: | ||
---|---|---|
Brand | Sandvik | |
Grade Status | Complementary | |
Applications | Turning | |
Substrate Class | Very Hard | |
Coat Type | PVD | |
Post Treat | N |
From Sandvik's website:
PVD-coated carbide grade with high hardness and good plastic deformation resistance.
Application Range for GC1115
Watch the Video:
"How to use the Carbide Grades Information"
and get the most out of this page!
Watch the Video:
"How to use the Carbide Grades Information"
and get the most out of this page!
ISO | Material Group | app | pmksort | App | Apps Range | 05 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
P | P - Steel | T | 0 | Turning | P05 - P20 | P | P | P | P | |||||
M | M - Stainless Steel | T | 1 | Turning | M05 - M20 | M | M | M | M | |||||
S | S - Superalloys | T | 4 | Turning | S15 - S20 | S | S |
Equivalent Grades for GC1115
The most compatible grade from each brand!
A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to echo
Brand | Application | Grade | Substrate | Coating | Gscore |
---|---|---|---|---|---|
Iscar | Turning | IC807 | Very Hard | PVD | 100% |
Kennametal | Turning | KCU10 | Very Hard | PVD | 100% |
Walter | Turning | WSM10S | Very Hard | PVD | 95% |
Seco | Turning | TS2000 | Very Hard | PVD | 95% |
Tungaloy | Turning | AH8015 | Very Hard | PVD | 95% |
Mitsubishi | Turning | MP9015 | Very Hard | PVD | 100% |
Sumitomo | Turning | AC1030U | Semi Hard | PVD | 85% |
Cutting Speed recommendations for GC1115
How to use our Cutting Speeds Recommendations
- Pay attention that your desired unit (SFM or m/min) is selected!
- Speeds are given for stable conditions of Machine, Tool, and workpiece.
- An empty cell means the grade is not available for the combination of material and application.
- For more specific Cutting Speeds Recommendations use our advanced
SPEEDS AND FEEDS CALCULATOR
Unit Selector:
SFM
m/min
uid | _ | Material Group | Turning (m/min) | Turning (SFM) | Milling (m/min) | Milling (SFM) | Parting (m/min) | Parting (SFM) | Grooving (m/min) | Grooving (SFM) | Driiling (mm/min) | Drilling (SFM) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
s6625c04f796f | P | Free Cutting Steel | 220 - 430 | 670 - 1310 | - | - | - | - | - | - | - | - |
s6625c04f796f | P | Low Carbon Steel (0.1-0.25%) | 205 - 255 | 620 - 770 | - | - | - | - | - | - | - | - |
s6625c04f796f | P | Carbon Steel (0.26-0.50%) | 175 - 255 | 530 - 770 | - | - | - | - | - | - | - | - |
s6625c04f796f | P | High Carbon Steel (0.51-1.0%) | 140 - 175 | 420 - 530 | - | - | - | - | - | - | - | - |
s6625c04f796f | P | High Carbon Steel (0.51-1.0%) | 140 - 175 | 420 - 530 | - | - | - | - | - | - | - | - |
s6625c04f796f | P | Low Alloyed Steel (180 HB Max) | 220 - 265 | 670 - 800 | - | - | - | - | - | - | - | - |
s6625c04f796f | P | Low Alloyed Steel (180-275 HB) | 125 - 220 | 380 - 670 | - | - | - | - | - | - | - | - |
s6625c04f796f | P | Low Alloyed Steel (275 -350 HB) | 80 - 125 | 240 - 380 | - | - | - | - | - | - | - | - |
s6625c04f796f | P | Low Alloyed Steel (275 -350 HB) | 80 - 125 | 240 - 380 | - | - | - | - | - | - | - | - |
s6625c04f796f | P | Tool Steel and High Alloy Steel (Annealed) | 75 - 175 | 220 - 530 | - | - | - | - | - | - | - | - |
s6625c04f796f | P | Tool Steel and High Alloy Steel (250-300 HB) | 55 - 125 | 160 - 380 | - | - | - | - | - | - | - | - |
s6625c04f796f | M | Ferritic Stainless Steel | 135 - 345 | 410 - 1050 | - | - | - | - | - | - | - | - |
s6625c04f796f | M | Martensitic Stainless Steel | 135 - 210 | 410 - 640 | - | - | - | - | - | - | - | - |
s6625c04f796f | M | Austenitic Stainless Steel | 135 - 170 | 410 - 510 | - | - | - | - | - | - | - | - |
s6625c04f796f | M | Duplex Stainless Steel | 40 - 115 | 120 - 350 | - | - | - | - | - | - | - | - |
s6625c04f796f | M | Precipitation Hardening St. St. | 155 - 190 | 470 - 570 | - | - | - | - | - | - | - | - |
s6625c04f796f | S | Iron (Fe) Based - Supper Alloys | 90 - 180 | 270 - 540 | - | - | - | - | - | - | - | - |
s6625c04f796f | S | Iron (Fe) Based - Supper Alloys | 90 - 180 | 270 - 540 | - | - | - | - | - | - | - | - |
s6625c04f796f | S | Nickel (Ni) Based - Supper Alloys (20 HRC Max | 55 - 160 | 160 - 480 | - | - | - | - | - | - | - | - |
s6625c04f796f | S | Nickel (Ni) Based - Supper Alloys (21-42 HRC) | 30 - 70 | 90 - 210 | - | - | - | - | - | - | - | - |
s6625c04f796f | S | Cobalt (Co) Based - Supper Alloys | 20 - 70 | 60 - 210 | - | - | - | - | - | - | - | - |
s6625c04f796f | S | Pure Titanium | 100 - 165 | 300 - 500 | - | - | - | - | - | - | - | - |
s6625c04f796f | S | Titanium alloys | 55 - 105 | 160 - 320 | - | - | - | - | - | - | - | - |