General Information for Grade GC3330
| Bran | Sandvik | |
| Grade Status | Active - Primary | |
| Main Applications | Milling | |
| Substrate Class | Semi Tough | |
| Coat Type | Thin CVD | |
| Post Treat | Y |
From Sandvik's website:
Hard, CVD-coated grade with thick coating, designed for medium to rough milling of all cast iron in average to stable conditions, both dry and wet. First choice for gray cast iron and mixed ISO K applications.
Application Range for GC3330
* If you don't understand the below table? Read This Explanation to make the most out of it!
Equivalent Grades for GC3330
The most compatible grade from each brand!
A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to GC3330
Cutting Speed recommendations for GC3330
How to use our Cutting Speeds Recommendations
- Pay attention that your desired unit (SFM or mm/min) is selected!
- Speeds are given for stable conditions of Machine, Tool, and workpiece.
- An empty cell means the grade is not available for the combination of material and application.
- For more specific Cutting Speeds Recommendations use our advanced
SPEEDS AND FEEDS CALCULATOR
Unit Selector:
SFM
mm/min
