ALTE SORTE BEACHTEN!
KCSM30 gibt es, aber wird nicht empfohlen von Kennametal für jede Anwendung in ihren Katalogen
Die nachstehende Liste enthält die kompatibelsten modernen Sorten nach Kennametal
Eine Punktzahl (bis zu 100 %) zeigt die Kompatibilität des aufgeführten Sorten mitKCSM30
| Brand | Grade | Application | Substrate | Coating | Score |
|---|---|---|---|---|---|
| Kennametal | KCU25 | Turning | Semi Hard | PVD | 90% |
| Kennametal | KCU10 | Turning | Very Hard | PVD | 80% |
| Kennametal | KC5410 | Turning | Hard | PVD | 80% |
| Kennametal | KCK20 | Turning | Semi Hard | CVD | 70% |
| Kennametal | KCK15B | Turning | Hard | CVD | 65% |
| Kennametal | KCK05 | Turning | Hard | CVD | 60% |
| Kennametal | KCP10B | Turning | Semi Hard | CVD | 60% |
| Kennametal | K313 | Turning | Semi Hard | Uncoated | 60% |
| Kennametal | KCM15B | Turning | Semi Tough | CVD | 55% |
| Kennametal | KCP05B | Turning | Hard | CVD | 55% |
| Kennametal | KCP25B | Turning | Semi Tough | CVD | 55% |
| Brand | Grade | Application | Substrate | Coating | Score |
|---|---|---|---|---|---|
| Kennametal | KCSM40 | Milling | Tough | PVD | 85% |
| Kennametal | KC520M | Milling | Hard | PVD | 85% |
| Kennametal | KC522M | Milling | Semi Hard | PVD | 85% |
| Kennametal | KC422M | Milling | Semi Tough | PVD | 80% |
| Kennametal | KCPM40 | Milling | Tough | PVD | 75% |
| Kennametal | KC510M | Milling | Very Hard | PVD | 70% |
| Kennametal | KC725M | Milling | Tough | PVD | 70% |
| Kennametal | KC410M | Milling | Very Hard | PVD | 60% |
| Kennametal | KCK15 | Milling | Hard | CVD | 55% |
| Kennametal | KCPK30 | Milling | Tough | CVD | 50% |
| Brand | Grade | Application | Substrate | Coating | Score |
|---|---|---|---|---|---|
| Kennametal | KCU25 | Parting | Semi Hard | PVD | 90% |
| Kennametal | KCU10 | Parting | Very Hard | PVD | 80% |
| Brand | Grade | Application | Substrate | Coating | Score |
|---|---|---|---|---|---|
| Kennametal | KC5025 | Grooving | Semi Hard | PVD | 90% |
| Kennametal | KCU25 | Grooving | Semi Hard | PVD | 90% |
| Kennametal | KCU10 | Grooving | Very Hard | PVD | 80% |
| Kennametal | KC5010 | Grooving | Hard | PVD | 75% |
| Kennametal | KCK20 | Grooving | Semi Hard | CVD | 70% |
| Kennametal | KCP25 | Grooving | Semi Tough | CVD | 65% |
| Kennametal | KCP10B | Grooving | Semi Hard | CVD | 60% |
| Kennametal | K313 | Grooving | Semi Hard | Uncoated | 60% |
| Kennametal | KCP10 | Grooving | Semi Hard | CVD | 55% |
| Kennametal | KCP25B | Grooving | Semi Tough | CVD | 55% |
