General Information:
BrandKennametal
Grade StatusComplementary
ApplicationTurning
Substrate ClassVery Hard
Coat TypeCVD
Post TreatY

From Kennametal's website:

Composition: A multilayered coating with moderately thick MTCVD TiCN-Al2O3 layers over a highly deformation-resistant carbide substrate. Application: Designed for high-speed machining of grey and ductile irons. The substrate and coating architecture together with post-coat treatment ensure a tremendous tool life advantage, especially when cutting higher tensile strength ductile and grey irons where workpiece size consistency and reliability of tool life are critical. Excellent both in continuous cuts and varied depths of cut.




Application Range for KCK05

* If you don't understand the below table? Read This Explanation to make the most out of it!



Equivalent Grades for KCK05

The most compatible grade from each brand!

A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to KCK05



Cutting Speed recommendations for KCK05

How to use our Cutting Speeds Recommendations


  • Pay attention that your desired unit (SFM or m/min) is selected!
  • Speeds are given for stable conditions of Machine, Tool, and workpiece.
  • An empty cell means the grade is not available for the combination of material and application.
  • For more specific Cutting Speeds Recommendations use our advanced
    SPEEDS AND FEEDS CALCULATOR

Unit Selector:

SFM m/min
Scroll to Top