Machining DataSheet for

Alumínio 2224 Menu:

Normas equivalentes
Composição química
Recomendação de velocidades de corte
Classes de metal duro recomendadas
Geometria da ponta

Informações gerais:
Grupo de materiais		N - Não Ferrosos (Alumínio, Latão, Plástico)
Subgrupo		N/A
Resistência à tração		[N/mm^2]
Gama de Usinabilidade		170% - 280%

Denominações internacionais equivalentes para Alumínio 2224

Padrão	Nome
sae	2224

Composição química para Alumínio 2224

Elemento	Montante
Cobre (Cu)	3.8~4.4%
Magnésio (Mg)	1.2~1.8%
Manganésio (Mn)	0.30~0.9%
Zinco (Zn)	0.25%
Ferro (Fe)	0.15%
Titânio (Ti)	0.15%
Silício (Si)	0.12%
Cromo (Cr)	0.1%
Alumínio (Al)	rem%

Recomendações de velocidades de corte para Alumínio forjado, ligado Curável, endurecido

* Clique nas velocidades abaixo para obter maior precisão em condições específicas!

Aplicação	Vc (m/min)	Vc (SFM)
Torneamento	380-620	1250-2030
Fresamento	470-780	1540-2560
Corte	250-415	820-1360
Canais	315-520	1030-1710
Furação	155-260	510-850

Important! A estimativa de velocidade é dada para uma situação ideal:

Classe de metal duro mais adequada
Fixação da ferramenta estável
Fixação da peça de trabalho estável
Matéria-prima de boa qualidade
Uma pequena saliência da ferramenta de corte.
Dureza nominal do material.
etc.

Clique nas velocidades na tabela acima para obter uma melhor precisão para parâmetros específicos
Ou utilize o nosso Calculadora de Velocidade e Avanço

Classes de metal duro recomendadas para Alumínio 2224

Torneamento
Fresagem (Indexável)
Separação
Ranhuramento

Grau de torneamento

Filter Brand:

Brand	Grade	ISO	Material	app	App	Coating	Apps Range	05	10	15	20	25	30	35	40	45
Sandvik	H10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N05 - N30	N	N	N	N	N	N
Iscar	IC20	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N05 - N30	N	N	N	N	N	N
Kennametal	KC5410	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	PVD	N05 - N20	N	N	N	N
Kennametal	K313	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N10 - N35		N	N	N	N	N	N
Walter	WN10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N05 - N20	N	N	N	N
Seco	KX	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N05 - N30	N	N	N	N	N	N
Tungaloy	KS05F	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	uncoated	N05 - N10	N	N
Tungaloy	TH10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	uncoated	N10 - N20		N	N	N
Mitsubishi	HTI10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N05 - N30	N	N	N	N	N	N
Sumitomo	H1	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	T	Turning	Uncoated	N10 - N30		N	N	N	N	N

Grau de fresagem (Indexável)

Filter Brand:

Brand	Grade	ISO	Material	app	App	Coating	Apps Range	05	10	15	20	25	30	35	40	45
Sandvik	H10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N05 - N15	N	N	N
Sandvik	H13A	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N15 - N30			N	N	N	N
Iscar	IC08	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N05 - N20	N	N	N	N
Iscar	IC28	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N15 - N30			N	N	N	N
Kennametal	KC410M (KC510M)	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	PVD	N05 - N15	N	N	N
Kennametal	KC422M (KC522M)	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	PVD	N20 - N30				N	N	N
Walter	WXN15	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	PVD	N05 - N25	N	N	N	N	N
Seco	H15	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N05 - N20	N	N	N	N
Seco	H25	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N10 - N35		N	N	N	N	N	N
Mitsubishi	HTI10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N05 - N20	N	N	N	N
Mitsubishi	TF15	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N15 - N35			N	N	N	N	N
Sumitomo	DL1000	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	DLC	N05 - N25	N	N	N	N	N
Sumitomo	DL2000	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	DLC	N05 - N30	N	N	N	N	N	N
Sumitomo	H1	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N15 - N30			N	N	N	N
Sumitomo	H20	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	M	Milling	Uncoated	N20 - N35				N	N	N	N

Grau de separação

Filter Brand:

Brand	Grade	ISO	Material	app	App	Coating	Apps Range	05	10	15	20	25	30	35	40	45
Sandvik	GC1105	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	PVD	N05 - N30	N	N	N	N	N	N
Sandvik	H10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	Uncoated	N10 - N30		N	N	N	N	N
Iscar	IC20	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	Uncoated	N05 - N30	N	N	N	N	N	N
Kennametal	KCU10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	PVD	N05 - N20	N	N	N	N
Kennametal	KCU25	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	PVD	N20 - N30				N	N	N
Walter	WN13	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	Uncoated	N05 - N20	N	N	N	N
Seco	HX	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	Uncoated	N10 - N30		N	N	N	N	N
Tungaloy	TH10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	uncoated	N10 - N20		N	N	N
Mitsubishi	HTI10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	P	Parting	Uncoated	N05 - N30	N	N	N	N	N	N

Grau de ranhuramento

Filter Brand:

Brand	Grade	ISO	Material	app	App	Coating	Apps Range	05	10	15	20	25	30	35	40	45
Sandvik	GC1125	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	PVD	N10 - N35		N	N	N	N	N	N
Sandvik	H10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	Uncoated	N10 - N30		N	N	N	N	N
Iscar	IC20	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	Uncoated	N05 - N30	N	N	N	N	N	N
Kennametal	K313	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	Uncoated	N10 - N30		N	N	N	N	N
Walter	WN13	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	Uncoated	N05 - N20	N	N	N	N
Seco	883	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	Uncoated	N05 - N30	N	N	N	N	N	N
Tungaloy	KS05F	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	uncoated	N05 - N10	N	N
Tungaloy	TH10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	uncoated	N10 - N20		N	N	N
Mitsubishi	HTI10	N	N - Non-Ferrous (Aluminum, Brass, Plastic)	G	Grooving	Uncoated	N05 - N30	N	N	N	N	N	N

Geometria recomendada da aresta/borda/ponta de corte da pastilha/inserto para Alumínio 2224

Tamanho de afiação:		0.00-0.01 mm / 0.000-0.000"
Ângulo de inclinação:		15° -25°
Ângulo do terreno:		Positive
Largura do terreno:		0.05-0.10 mm / 0.002-0.004"
Inserção no solo:		Highly Recommended
Topo polido:		Recommended

Our Top Picks