- Äquivalente Normen
- Chemische Zusammensetzung
- Empfohlene Schnittgeschwindigkeiten
- Empfohlene Hartmetallsorten
- Schneidengeometrie
Material Ti-5Al-5V-5Mo-3Cr Menü:
| Allgemeine Informationen: | ||
|---|---|---|
| Werkstoff-Gruppe | S - Superlegierungen (hitzebeständig und Titan) | |
| Untergruppe | Titan-Legierung | |
| Härte | 40.0 HRC | |
| Zugfestigkeit | 1270 [N/mm^2] | |
| Bearbeitbarkeit | 15% | |
Äquivalente internationale Bezeichnungen für Material Ti-5Al-5V-5Mo-3Cr
| Standard | Name |
|---|
Chemische Zusammensetzung für Material Ti-5Al-5V-5Mo-3Cr
Leider nicht verfügbar für dieses Material
Schnittgeschwindigkeiten Empfehlungen für Material Ti-5Al-5V-5Mo-3Cr
* Klicken Sie auf die nachstehenden Geschwindigkeiten für höhere Präzision unter bestimmten Bedingungen!
| Anmeldung | Vc (m/min) | Vc (SFM) |
|---|---|---|
| Drehen | 50-70 | 160-230 |
| Fräsen | 40-50 | 130-160 |
| Abstechen | 30-45 | 100-150 |
| Nuten | 45-60 | 150-200 |
| Bohren | 45-60 | 150-200 |
Important! Die geschätzte Geschwindigkeit wird für eine ideale Situation angegeben:
- Am besten geeignete Hartmetallsorte
- Stabile Werkzeugspannung
- Stabile Werkstückspannung
- Gute Qualität des Rohstoffs
- Ein kurzer Überhang des Schneidwerkzeugs.
- Nennhärtedes Materials.
- usw.
Klicken Sie auf die Geschwindigkeiten in der obigen Tabelle, um eine bessere Genauigkeit für bestimmte Parameter zu erhalten
Oder nutzen Sie unser Geschwindigkeit und Vorschubberechnung
Empfohlene Hartmetallsorten für Material Ti-5Al-5V-5Mo-3Cr
Sorte für Drehen
| Brand | Grade | ISO | Material | app | App | Coating | Apps Range | 05 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sandvik | S05F | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | CVD | S05 - S10 | S | S | |||||||
| Sandvik | GC1105 | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S10 - S15 | S | S | |||||||
| Sandvik | GC1115 | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S15 - S20 | S | S | |||||||
| Sandvik | GC1125 | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S20 - S30 | S | S | S | ||||||
| Iscar | IC806 (IC804) | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S05 - S20 | S | S | S | S | |||||
| Iscar | IC807 (IC907) | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S10 - S25 | S | S | S | S | |||||
| Iscar | IC830 (IC328) | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S20 - S35 | S | S | S | S | |||||
| Kennametal | KCU10 (KC5010) | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S10 - S20 | S | S | S | ||||||
| Kennametal | KCU25 (KC5025) | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S20 - S30 | S | S | S | ||||||
| Walter | WSM10S (WSM10) | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S05 - S20 | S | S | S | S | |||||
| Walter | WSM01 | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S05 - S05 | S | ||||||||
| Walter | WSM20S (WSM20) | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S10 - S30 | S | S | S | S | S | ||||
| Walter | WSM30S (WSM30) | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S20 - S40 | S | S | S | S | S | ||||
| Seco | TS2000 (CP200) | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S05 - S25 | S | S | S | S | S | ||||
| Seco | CP500 | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S15 - S25 | S | S | S | ||||||
| Seco | TS2500 | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S20 - S35 | S | S | S | S | |||||
| Seco | CP600 | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S20 - S35 | S | S | S | S | |||||
| Tungaloy | AH8005 | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S05 - S10 | S | S | |||||||
| Tungaloy | AH8015 | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S10 - S20 | S | S | S | ||||||
| Mitsubishi | MP9005 | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S05 - S15 | S | S | S | ||||||
| Mitsubishi | MP9015 | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S10 - S20 | S | S | S | ||||||
| Mitsubishi | VP20RT | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S15 - S35 | S | S | S | S | S | ||||
| Sumitomo | AC5005S (AC510U) | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S05 - S10 | S | S | |||||||
| Sumitomo | AC5015S | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S05 - S15 | S | S | S | ||||||
| Sumitomo | AC5025S (AC520U) | S | S - Superalloys (Heat resistant and Titanium) | T | Turning | PVD | S10 - S30 | S | S | S | S | S |
Sorte zum Fräsen (wendbar)
| Brand | Grade | ISO | Material | app | App | Coating | Apps Range | 05 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sandvik | S30T | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S10 - S30 | S | S | S | S | S | ||||
| Sandvik | S40T | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | CVD | S25 - S40 | S | S | S | S | |||||
| Iscar | IC808 (IC908) | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S05 - S25 | S | S | S | S | S | ||||
| Iscar | IC830 (IC928) | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S20 - S40 | S | S | S | S | S | ||||
| Kennametal | KC510M | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S05 - S10 | S | S | |||||||
| Kennametal | KC522M | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S15 - S30 | S | S | S | S | |||||
| Kennametal | KCSM40 | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S25 - S40 | S | S | S | S | |||||
| Seco | F40M | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S05 - S25 | S | S | S | S | S | ||||
| Seco | MS2500 | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | CVD | S05 - S25 | S | S | S | S | S | ||||
| Seco | MS2050 | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S10 - S35 | S | S | S | S | S | S | |||
| Tungaloy | AH120 | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S10 - S25 | S | S | S | S | |||||
| Tungaloy | AH725 | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S15 - S25 | S | S | S | ||||||
| Mitsubishi | MP9120 | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S05 - S25 | S | S | S | S | S | ||||
| Mitsubishi | MP9130 | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S15 - S35 | S | S | S | S | S | ||||
| Sumitomo | ACU2500 | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S05 - S25 | S | S | S | S | S | ||||
| Sumitomo | ACM200 | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | CVD | S10 - S30 | S | S | S | S | S | ||||
| Sumitomo | ACM300 | S | S - Superalloys (Heat resistant and Titanium) | M | Milling | PVD | S20 - S40 | S | S | S | S | S |
Sorte für Abstechen
| Brand | Grade | ISO | Material | app | App | Coating | Apps Range | 05 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sandvik | GC1105 | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S05 - S20 | S | S | S | S | |||||
| Sandvik | GC1145 | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S20 - S40 | S | S | S | S | S | ||||
| Iscar | IC807 (IC907) | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S05 - S10 | S | S | |||||||
| Iscar | IC808 (IC908) | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S10 - S25 | S | S | S | S | |||||
| Iscar | IC830 (IC328) | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S25 - S40 | S | S | S | S | |||||
| Kennametal | KCU10 | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S05 - S15 | S | S | S | ||||||
| Kennametal | KCU25 | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S15 - S30 | S | S | S | S | |||||
| Walter | WSM13S | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S05 - S20 | S | S | S | S | |||||
| Walter | WSM23S | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S10 - S30 | S | S | S | S | S | ||||
| Walter | WSM33S (WSM33) | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S20 - S40 | S | S | S | S | S | ||||
| Walter | WSM43S | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S30 - S45 | S | S | S | S | |||||
| Seco | CP500 | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S10 - S30 | S | S | S | S | S | ||||
| Seco | CP600 | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S20 - S40 | S | S | S | S | S | ||||
| Tungaloy | AH725 | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S15 - S25 | S | S | S | ||||||
| Tungaloy | AH7025 | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S15 - S25 | S | S | S | ||||||
| Mitsubishi | VP10RT | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S05 - S10 | S | S | |||||||
| Mitsubishi | VP20RT | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S10 - S25 | S | S | S | S | |||||
| Mitsubishi | VP30RT | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S25 - S40 | S | S | S | S | |||||
| Sumitomo | AC520U | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S10 - S25 | S | S | S | S | |||||
| Sumitomo | AC1030U (AC530U) | S | S - Superalloys (Heat resistant and Titanium) | P | Parting | PVD | S20 - S40 | S | S | S | S | S |
Sorte für Nuten
| Brand | Grade | ISO | Material | app | App | Coating | Apps Range | 05 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sandvik | GC1125 | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S10 - S30 | S | S | S | S | S | ||||
| Iscar | IC806 (IC804) | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S05 - S15 | S | S | S | ||||||
| Iscar | IC808 (IC908) | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S15 - S25 | S | S | S | ||||||
| Iscar | IC830 (IC328) | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S25 - S35 | S | S | S | ||||||
| Kennametal | KCU10 | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S05 - S20 | S | S | S | S | |||||
| Kennametal | KCU25 | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S20 - S30 | S | S | S | ||||||
| Walter | WSM13S | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S05 - S20 | S | S | S | S | |||||
| Walter | WSM23S | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S10 - S30 | S | S | S | S | S | ||||
| Walter | WSM33S (WSM33) | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S20 - S40 | S | S | S | S | S | ||||
| Walter | WSM43S | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S30 - S45 | S | S | S | S | |||||
| Seco | CP500 | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S15 - S20 | S | S | |||||||
| Seco | CP600 | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S20 - S35 | S | S | S | S | |||||
| Tungaloy | AH905 | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S05 - S10 | S | S | |||||||
| Tungaloy | AH7025 | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S15 - S25 | S | S | S | ||||||
| Tungaloy | AH725 | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S15 - S25 | S | S | S | ||||||
| Mitsubishi | VP10RT | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S05 - S10 | S | S | |||||||
| Mitsubishi | VP20RT | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S10 - S25 | S | S | S | S | |||||
| Mitsubishi | VP30RT | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S25 - S40 | S | S | S | S | |||||
| Sumitomo | AC520U | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S10 - S25 | S | S | S | S | |||||
| Sumitomo | AC1030U (AC530U) | S | S - Superalloys (Heat resistant and Titanium) | G | Grooving | PVD | S20 - S40 | S | S | S | S | S |
Empfohlene Schneidkantengeometrie der Wendeschneidplatte für Material Ti-5Al-5V-5Mo-3Cr
| Schneidkantenverrundung: | 0.02-0.05 mm / 0.001-0.002" | |
| Spanwinkel: | 13° -18° | |
| Spanflächenwinkel: | Neutral | |
| Spanflächenlänge: | 0.10-0.20 mm / 0.004-0.008" | |
| geschliffener Schneideinsatz: | Recommended |
