ALTE SORTE BEACHTEN!
WAM20 gibt es, aber wird nicht empfohlen von Walter für jede Anwendung in ihren Katalogen
Die nachstehende Liste enthält die kompatibelsten modernen Sorten nach Walter
Eine Punktzahl (bis zu 100 %) zeigt die Kompatibilität des aufgeführten Sorten mitWAM20
| Brand | Grade | Application | Substrate | Coating | Score |
|---|---|---|---|---|---|
| Walter | WMP20S | Turning | Semi Tough | CVD | 100% |
| Walter | WKP33S | Turning | Tough | CVD | 90% |
| Walter | WKP30S | Turning | Tough | CVD | 85% |
| Walter | WPP30S | Turning | Tough | CVD | 85% |
| Walter | WSM30S | Turning | Semi Tough | PVD | 75% |
| Walter | WKK10S | Turning | Hard | CVD | 75% |
| Walter | WPP01 | Turning | Hard | CVD | 75% |
| Walter | WPP20S | Turning | Semi Tough | CVD | 75% |
| Walter | WKK20S | Turning | Semi Hard | CVD | 70% |
| Walter | WPP05S | Turning | Hard | CVD | 70% |
| Walter | WPP10S | Turning | Semi Hard | CVD | 65% |
| Walter | WSM20S | Turning | Hard | PVD | 55% |
| Walter | WKK25S | Turning | Semi Hard | PVD | 50% |
| Brand | Grade | Application | Substrate | Coating | Score |
|---|---|---|---|---|---|
| Walter | WKP25S | Milling | Tough | CVD | 95% |
| Walter | WAK15 | Milling | Semi Hard | CVD | 85% |
| Walter | WKP35G | Milling | Tough | CVD | 75% |
| Walter | WMP45G | Milling | Tough | CVD | 75% |
| Walter | WSM45X | Milling | Tough | CVD | 75% |
| Walter | WSM35S | Milling | Tough | PVD | 65% |
| Walter | WKK25S | Milling | Semi Hard | PVD | 50% |
| Walter | WSP45S | Milling | Tough | PVD | 50% |
