Basic Thread Dimensions
| Property | Inch | mm |
|---|---|---|
| Nominal Diameter | 0.812 | 20.625 |
| Pitch (TPI) | 20 | |
| Pitch (Distance) | 0.05 | 1.27 |
| Pitch Diameter | 0.7795 | 19.799 |
| Minor Diameter | 0.7525 | 19.114 |
| Thread Height | 0.0271 | 0.688 |
| Addendum | 0.0162 | 0.411 |
| Crest (External) Root (Internal) |
0.0063 | 0.16 |
| Tap Drill Size (75% depth) |
0.763 | 19.39 |
| Lead Angle (Single Start) |
1.17° | |
| Thread Family | Unified Extra-Fine pitch (UNEF) | |
| Relevant Standards | ASME B1.1-2003 | |
| Equivalent MetricThread | M20 X 1.5 |
For more threading data scroll down, or use the Thread Calculator
Choose the Threading Data you want to explore
13/16 - 20 UNEFPossible Thread Classes
13/16 - 20 UNEF 2A (External)
* Permisable values for thread Class 2A
| # | Description | Value (Inch) | Value (mm) |
|---|---|---|---|
| es | Allowance | 0.0013 (Ref) | 0.033 (Ref) |
| d | Major Diameter | 0.8026 - 0.8107 | 20.386 - 20.592 |
| d2 | Pitch Diameter | 0.774 - 0.7782 | 19.66 - 19.766 |
| d3 | Minor Diameter (UNR Only) | 0.7512 (Ref) | 19.08 (Ref) |
| α | Varation of 30° anngle (+/-) | 1.1667° | |
| P | Varation of pitch (+/-) | 0.0012 (Ref) | 0.03 (Ref) |
* Values are calculated for Length of engagement of 5xPitch. For calculations of different engagement length use the Thread Calculator'
* Back to Thread Class Selection
13/16 - 20 UNEF 3A (External)
* Permisable values for thread Class 3A
| # | Description | Value (Inch) | Value (mm) |
|---|---|---|---|
| es | Allowance | 0 (Ref) | 0 (Ref) |
| d | Major Diameter | 0.8039 - 0.812 | 20.419 - 20.625 |
| d2 | Pitch Diameter | 0.7764 - 0.7795 | 19.721 - 19.799 |
| d3 | Minor Diameter (UNR Only) | 0.7525 (Ref) | 19.114 (Ref) |
| α | Varation of 30° anngle (+/-) | 1.1667° | |
| P | Varation of pitch (+/-) | 0.0009 (Ref) | 0.023 (Ref) |
* Values are calculated for Length of engagement of 5xPitch. For calculations of different engagement length use the Thread Calculator'
* Back to Thread Class Selection
13/16 - 20 UNEF 2B (Internal)
* Permisable values for thread Class 2B
| # | Description | Value (Inch) | VValue (mm) |
|---|---|---|---|
| D1 | Minor Diameter | 0.758 - 0.769 | 19.253 - 19.533 |
| D2 | Pitch Diameter | 0.7795 - 0.7849 | 19.799 - 19.936 |
| D | Major Diameter | 0.8120 (Min) | 20.625 (Min) |
| α | Varation of 30° anngle (+/-) | 1.1667° | |
| P | Varation of Pitch (+/-) | 0.0016 (Ref) | 0.041 (Ref) |
* Values are calculated for Length of engagement of 5xPitch. For calculations of different engagement length use the Thread Calculator
* Back to Thread Class Selection
13/16 - 20 UNEF 3B (Internal)
* Permisable values for thread Class 3B
| # | Description | Value (Inch) | VValue (mm) |
|---|---|---|---|
| D1 | Minor Diameter | 0.7579 - 0.7657 | 19.251 - 19.449 |
| D2 | Pitch Diameter | 0.7795 - 0.7836 | 19.799 - 19.903 |
| D | Major Diameter | 0.8120 (Min) | 20.625 (Min) |
| α | Varation of 30° anngle (+/-) | 1.1667° | |
| P | Varation of Pitch (+/-) | 0.0012 (Ref) | 0.03 (Ref) |
* Values are calculated for Length of engagement of 5xPitch. For calculations of different engagement length use the Thread Calculator
* Back to Thread Class Selection
Tap Drill Sizes for 13/16 - 20 UNEF
- If not specified, assume a thread depth of 75%.
- You can learn more about thread depth in tapping here.
- To get the tap drill size in other depths, use our Tap Drill Size Calculator .
| Thread Depth | Tap Drill Size (Inch) | Tap Drill Size (mm) |
|---|---|---|
| 55% | 0.776 | 19.72 |
| 60% | 0.773 | 19.63 |
| 65% | 0.770 | 19.55 |
| 70% | 0.767 | 19.47 |
| 75% | 0.763 | 19.39 |
| 80% | 0.760 | 19.30 |
| 85% | 0.757 | 19.22 |
Over Wire Measurements for 13/16 - 20 UNEF
* OverWire is a measuring method to obatin the pitch diameter of threads. It is mostly used when a manufacturer does not have a Go/Nogo gauge for a thread. You can learn more about it here
| Inch | mm | |
|---|---|---|
| Permissible Wire Diameter Range | 0.0253 - 0.0505 | 0.642 - 1.283 |
| Ideal Wire Diameter | 0.0289 | 0.733 |
| Possible Wires From Standard Sets |
* 0.0262 * 0.0289 |
* 0.722 * 0.866 * 1.01 * 1.155 |
Once you know your wire diameter, you need to find out what is the premissable Measurement for your pitch diameter (Depending on the class). Use our Over Wire Calculator to find out!
CNC Gcode Program for Turning of 13/16 - 20 UNEF
The below sample Gcode is configured for:
- Fanuc Controller
- External RH Thread
- Right hand tool, machining towards the chuck
- Flank Infeed method with contant volume
- Flank Infeed method with contant volume
- Cutting conditions for steel
- Default number of passes
You can configure all the above parameters and much more in our Thread Turning Gcode Generator
%
O0100
(MACHINING DOCTOR - THREADING CNC PROGRAM)
(CONTROLER - FANUC A)
(THREAD - D=0.812 INCH, P=0.05 INCH, L=0.5 INCH)
(APPLICATION - EXTERNAL TURNING, TOWARDS CHUCK, RH TOOL, RH THREAD)
(FEED - 17 PASSES, FLANK, CONSTANT VOLUME)
(FINISH PASS - 0.0005 INCH)
(WITH CHAMFER - NO)
G28 U0 W0
T0101 G99 G97 S1411 M03
G00 Z5.1
X 30.8 M08
G76 P010060 Q13 R0.013
G76 X19.067 Z-12.7 P779 Q186 F1.27 R0.00
G28 U0 W0
M09
M30
%CNC Gcode Program for Thread Milling of 13/16 - 20 UNEF
The below sample Gcode is configured for:
- Fanuc Controller
- Internal RH Thread
- Climb Milling
- Cutter diameter: 70% of the thread diameter
- Single tooth Thread Mill cutter
- Cutting conditions for steel
- One radial pass
You can configure all the above parameters and much more in our Thread Milling Gcode Generator
%
O101
(WWW.MACHININGDOCTOR.COM - THREADMILLING PROGRAM)
(CONTROLER - FANUC)
(THREAD - D=0.812 INCH, P=0.05 INCH, L=0.5 INCH)
(APPLICATION - INTERNAL, RH THREAD, CLIMB MILLING)
(CUTTER - D=0.406 [SINGLE TOOTH])
N1 M06 T1
G54
G90 G40 G17 G94 G21
G00 X0 Y0 S2822 M03
G43 H1 Z25.4 M08
(M-CODE "THROUGH COOLANT ON")
(PASS 1 / 1)
G90 G01 Z-12.8588 F2032
G91 G01 G41 D1 X2.5781 Y-2.5781 F430
G03 X2.5781 Y2.5781 Z0.1588 I0 J2.5781 F108
G03 Z1.27 I-5.1562 J0 F215
G03 Z1.27 I-5.1562 J0
G03 Z1.27 I-5.1562 J0
G03 Z1.27 I-5.1562 J0
G03 Z1.27 I-5.1562 J0
G03 Z1.27 I-5.1562 J0
G03 Z1.27 I-5.1562 J0
G03 Z1.27 I-5.1562 J0
G03 Z1.27 I-5.1562 J0
G03 Z1.27 I-5.1562 J0
G03 X-2.5781 Y2.5781 Z0.1588 I-2.5781 J0
G01 G40 X-2.5781 Y-2.5781 F2032
G90 G00 Z25.4
M30
(PLEASE NOTE THIS GCODE HAS NOT BEEN TESTED ON YOUR MACHINE AND SETUP. WE CANNOT GUARANTEE ITS ACCURACY OR COMPATIBILITY. NOTE THAT YOU ARE USING IT AT YOUR OWN RISK, AND WE SHALL NOT BE HELD LIABLE FOR ANY DAMAGES OR LOSSES ARISING FROM THE USE OF THIS PROGRAM.)
%