Machining DataSheet for

General Information:
Material GroupP - Steel
Sub-GroupLow Alloy Steel
Tensile Strength750-1100 [N/mm^2]
Machinability60%

Watch the Video:
"How to use the Material Pages"
and get the most out of this page!

Watch Video

Machining Steel 4142

Steel 4142 is a low-alloy steel with a carbon content of 0.4% and additional 2.1% content of manganese, chromium, and molybdenum.. (See details in the below table). Steel 4142 has a machinability rating of 60%.

Low alloy steels are very popular in machine shops. The small amount of alloying elements enhances their mechanical properties and hardenability without a significant sacrifice in terms of machinability.

You can find here a list of machinability Ratings for different Low Alloy Steels.

Summery:

  • For general Turning of Steel 4142 at stable conditions use a grade with a Hard substrate and CVD coating.
  • In case you are running at a cutting speed that is lower than 490 SFM (150 m/min), it is better to use a grade with a
    • Hard substrate and PVD coating.
  • For general Milling use a grade with a Semi Hard substrate and PVD coating.
  • For detailed carbide grades recommendations, check the Below Chart, or use the Grades Wizrad.
  • Recommended Cutting speed range for turning at stable conditions is 740 - 1000 [SFM] / 225 - 305 [m/min].
  • Recommended Cutting speed range for milling with stable clamping and short overhang is 460 - 620 [SFM] / 140 - 190 [m/min]
  • For detailed cutting speed recomendations, check the Below Table, or use our Speed and Feed Calculator.

    • Equivalent International Designations for Steel 4142

    Standard Name
    sae4142
    wnr1.7223
    din41CrMo4
    bs708M40
    ss2244
    anfor42CD4TS
    uni41CrMo4
    unf42CrMo4
    js1SCM440

    Chemical Composition for Steel 4142

    Element Amount
    Chromium (Cr).80-1.10%
    Manganese (Mn).75-1.00%
    Carbon (C).40-.45%
    Molybdenum (Mo).15-.25%

    Cutting Speeds Recomendations for Steel 4142

    * Click on the speeds below for higher precision in specific conditions!

    ApplicationVc (m/min)Vc (SFM)
    Turning225-305740-1000
    Milling140-190460-620
    Parting105-145340-480
    Grooving125-170410-560
    Drilling90-120300-390

    Important! The speed estimation is given for an ideal situation:

    • Most suitable carbide grade
    • Stable tool clamping
    • Stable workpiece clamping
    • Good quality raw material
    • A short overhang of the cutting tool.
    • Nominal hardness of the material.
    • etc.
    Click on the speeds in the above table to get better precision for specific parameters
    Or use our Speed and Feed Calculator


    Recommended Carbide Grades for Steel 4142

    * If you do nott understand the below table? Read This Explanation to make the most out of it!

    Grade for Turning

    Grade for Parting Off

    Grade for Grooving

    Grade for Milling (Indexable)

    Recommended Insert Cutting Edge Geometry for Steel 4142

    Honing Size:0.05-0.08 mm / 0.002-0.003"
    Rake Angle:11° -13°
    Land Angle:Positive
    Land Width:0.20-0.30 mm / 0.008-0.012"

    Learn more about carbide inserts Cutting-Edge Geometry Parameters.

    Start typing and press enter to search

    Scroll to Top