Machining DataSheet for

General Information:
Material GroupM - Stainless Steel
Sub-GroupPH Stainless Steel
Tensile Strength950-1300 [N/mm^2]
Machinability Range40% - 50%

Watch the Video:
"How to use the Material Pages"
and get the most out of this page!

Watch Video

Equivalent International Designations for Material EV8

Standard Name
saeEV8
wnr1.4871
dinX53CrMnNiN21-9
bs349S54
anforZ52CMN21.09
uniX53CrMnNiN21-9
unfF.3217-X53CrMnNiN21-09
js1SUH35 / SUH36

Chemical Composition for Material EV8

Sorry, Not Availble for this Material


Cutting Speeds Recomendations for Stainless steel - Precipitation Hardening

* Click on the speeds below for higher precision in specific conditions!

ApplicationVc (m/min)Vc (SFM)
Turning175-220570-720
Milling110-140360-460
Parting70-90230-300
Grooving105-130340-430
Drilling50-65160-210

Important! The speed estimation is given for an ideal situation:

  • Most suitable carbide grade
  • Stable tool clamping
  • Stable workpiece clamping
  • Good quality raw material
  • A short overhang of the cutting tool.
  • Nominal hardness of the material.
  • etc.
Click on the speeds in the above table to get better precision for specific parameters
Or use our Speed and Feed Calculator


Recommended Carbide Grades for Material EV8

* If you do nott understand the below table? Read This Explanation to make the most out of it!

Grade for Turning

Grade for Parting Off

Grade for Grooving

Grade for Milling (Indexable)

Recommended Insert Cutting Edge Geometry for Material EV8

Honing Size:0.03-0.05 mm / 0.001-0.002"
Rake Angle:9° -11°
Land Angle:Positive
Land Width:0.20-0.30 mm / 0.008-0.012"

Learn more about carbide inserts Cutting-Edge Geometry Parameters.

Start typing and press enter to search

Scroll to Top