Machining DataSheet for

General Information:
Material GroupM - Stainless Steel
Sub-GroupDuplex Stainless Steel
Hardness225.0 HB
Tensile Strength800 [N/mm^2]
Machinability Range10% - 30%

Watch the Video:
"How to use the Material Pages"
and get the most out of this page!

Watch Video

Equivalent International Designations for Material Uranus 45N22CrMo

Standard Name
dinX2CrNiMoN22-5-3

Chemical Composition for Material Uranus 45N22CrMo

Element Amount
Iron (Fe)72.6%
Chromium (Cr)23%
Nickel (Ni)4%
Molybdenum (Mo)2%
Manganese (Mn)2%
Silicon (Si)1%
Phosphorus (P)0.035%
Carbon (C)0.03%
Sulfur (S)0.015%

Cutting Speeds Recomendations for Stainless steel - Duplex

* Click on the speeds below for higher precision in specific conditions!

ApplicationVc (m/min)Vc (SFM)
Turning45-130150-430
Milling30-85100-280
Parting20-5570-180
Grooving25-8080-260
Drilling15-4050-130

Important! The speed estimation is given for an ideal situation:

  • Most suitable carbide grade
  • Stable tool clamping
  • Stable workpiece clamping
  • Good quality raw material
  • A short overhang of the cutting tool.
  • Nominal hardness of the material.
  • etc.
Click on the speeds in the above table to get better precision for specific parameters
Or use our Speed and Feed Calculator


Recommended Carbide Grades for Material Uranus 45N22CrMo

* If you do nott understand the below table? Read This Explanation to make the most out of it!

Grade for Turning

Grade for Parting Off

Grade for Grooving

Grade for Milling (Indexable)

Recommended Insert Cutting Edge Geometry for Material Uranus 45N22CrMo

Honing Size:0.03-0.05 mm / 0.001-0.002"
Rake Angle:9° -11°
Land Angle:Positive
Land Width:0.20-0.30 mm / 0.008-0.012"

Learn more about carbide inserts Cutting-Edge Geometry Parameters.

Start typing and press enter to search

Scroll to Top