Machining DataSheet for

General Information:
Material GroupP - Steel
Sub-GroupCarbon Steel
Tensile Strength1100-1350 [N/mm^2]
Machinability Range55% - 80%

Watch the Video:
"How to use the Material Pages"
and get the most out of this page!

Watch Video

Equivalent International Designations for Steel 35NCD14

Standard Name
anfor35NCD14

Chemical Composition for Steel 35NCD14

Sorry, Not Availble for this Material


Cutting Speeds Recomendations for Non-alloyed steel 0.26-0.50% Carbon

* Click on the speeds below for higher precision in specific conditions!

ApplicationVc (m/min)Vc (SFM)
Turning240-350790-1150
Milling150-220490-720
Parting115-170380-560
Grooving135-195440-640
Drilling95-140310-460

Important! The speed estimation is given for an ideal situation:

  • Most suitable carbide grade
  • Stable tool clamping
  • Stable workpiece clamping
  • Good quality raw material
  • A short overhang of the cutting tool.
  • Nominal hardness of the material.
  • etc.
Click on the speeds in the above table to get better precision for specific parameters
Or use our Speed and Feed Calculator


Recommended Carbide Grades for Steel 35NCD14

* If you do nott understand the below table? Read This Explanation to make the most out of it!

Grade for Turning

Grade for Parting Off

Grade for Grooving

Grade for Milling (Indexable)

Recommended Insert Cutting Edge Geometry for Steel 35NCD14

Honing Size:0.05-0.08 mm / 0.002-0.003"
Rake Angle:11° -13°
Land Angle:Positive
Land Width:0.20-0.30 mm / 0.008-0.012"

Learn more about carbide inserts Cutting-Edge Geometry Parameters.

Start typing and press enter to search

Scroll to Top