Machining DataSheet for

General Information:
Material GroupN - Non-Ferrous (Aluminum, Brass, Plastic)
Sub-GroupN/A
Tensile Strength [N/mm^2]
Machinability Range0% - 0%

Watch the Video:
"How to use the Material Pages"
and get the most out of this page!


Equivalent International Designations for Material B-148-52

Standard Name
saeB-148-52
wnr2.0975
dinG-CuAl10Ni

Chemical Composition for Material B-148-52

Sorry, Not Availble for this Material


Cutting Speeds Recomendations for Copper Alloys

* Click on the speeds below for higher precision in specific conditions!

ApplicationVc (m/min)Vc (SFM)
Turning220-445720-1460
Milling280-555920-1820
Parting150-295490-970
Grooving185-370610-1210
Drilling95-185310-610

Important! The speed estimation is given for an ideal situation:

  • Most suitable carbide grade
  • Stable tool clamping
  • Stable workpiece clamping
  • Good quality raw material
  • A short overhang of the cutting tool.
  • Nominal hardness of the material.
  • etc.
Click on the speeds in the above table to get better precision for specific parameters
Or use our Speed and Feed Calculator


Recommended Carbide Grades for Material B-148-52

* If you do nott understand the below table? Read This Explanation to make the most out of it!

Grade for Turning

Grade for Parting Off

Grade for Grooving

Grade for Milling (Indexable)

Recommended Insert Cutting Edge Geometry for Material B-148-52

Honing Size:0.00-0.01 mm / 0.000-0.000"
Rake Angle:15° -25°
Land Angle:Positive
Land Width:0.05-0.10 mm / 0.002-0.004"
Ground Insert:Highly Recommended
Polished top:Recommended

Learn more about carbide inserts Cutting-Edge Geometry Parameters.

Enjoy Ads Free Browsing !

Are you tired of ads on our website? Become a premium user for Just 1.5 Dollars per Month and get rid of all the ads pop-ups.

Scroll to Top