General Information:
Material GroupK - Cast Iron
Sub-GroupCast Iron
Hardne155.0 HB
Tensile Strength600 [N/mm^2]
Machinability Range150% - 220%

Equivalent International Designations for Cast Iron GGG-Ni35

StandardName
saeA 439 Type D-5
wnr0.7683
dinGGG-Ni35
bsS-Ni 35
anforS-N 35


Chemical Composition for Cast Iron GGG-Ni35

Sorry, Not Availble for this Material


Cutting Speeds Recomendations for Nodular cast iron - Ferritic

* Click on the speeds below for higher precision in specific conditions!

ApplicationVc (m/min)Vc (SFM)
Turning345-5051130-1660
Milling235-340770-1120
Parting175-255570-840
Grooving240-350790-1150
Drilling195-285640-930

Important! The speed estimation is given for an ideal situation:

  • Most suitable carbide grade
  • Stable tool clamping
  • Stable workpiece clamping
  • Good quality raw material
  • A short overhang of the cutting tool.
  • Nominal hardness of the material.
  • etc.
Click on the speeds in the above table to get better precision for specific parameters
Or use our Speed and Feed Calculator



Recommended Carbide Grades for Cast Iron GGG-Ni35

* If you don't understand the below table? Read This Explanation to make the most out of it!

Grade for Turning

Grade for Parting Off

Grade for Grooving

Grade for Milling (Indexable)

Recommended Insert Cutting Edge Geometry for Cast Iron GGG-Ni35

Honing Siz0.05-0.10 mm / 0.002-0.004"
Rake Angl0° -0°
Land AnglNegative
Land Widt0.30-0.40 mm / 0.012-0.016"

Learn more about carbide inserts Cutting-Edge Geometry Parameters.

Subscribe to out Newsletter and Get the Free Machinability eBook
Scroll to Top