OLD GRADE NOTICE!
GC3234 exsists, but it is not recomended by Sandvik for any application in their catalogs
The list below contains the Most Compatible modern grades by Sandvik
A score (Up to 100%) shows the compatibliny of the listed Grade withGC3234
| Brand | Grade | Application | Substrate | Coating | Score |
|---|---|---|---|---|---|
| Sandvik | GC1125 | Turning | Semi Hard | PVD | 95% |
| Sandvik | GC1105 | Turning | Hard | PVD | 85% |
| Sandvik | GC1115 | Turning | Very Hard | PVD | 85% |
| Sandvik | GC2035 | Turning | Semi Tough | PVD | 75% |
| Sandvik | GC3210 | Turning | Hard | CVD | 75% |
| Sandvik | GC3205 | Turning | Hard | CVD | 70% |
| Sandvik | GC4305 | Turning | Hard | CVD | 70% |
| Sandvik | GC4415 | Turning | Semi Hard | CVD | 70% |
| Sandvik | GC3225 | Turning | Semi Tough | CVD | 65% |
| Sandvik | H10 | Turning | Hard | Uncoated | 65% |
| Sandvik | GC4425 | Turning | Semi Tough | CVD | 60% |
| Sandvik | S05F | Turning | Very Hard | CVD | 60% |
| Sandvik | GC2015 | Turning | Semi Tough | CVD | 55% |
| Sandvik | GC2220 | Turning | Semi Tough | CVD | 55% |
| Sandvik | GC2025 | Turning | Tough | CVD | 50% |
| Brand | Grade | Application | Substrate | Coating | Score |
|---|---|---|---|---|---|
| Sandvik | GC1020 | Milling | Hard | PVD | 95% |
| Sandvik | GC1130 | Milling | Semi Hard | PVD | 95% |
| Sandvik | S30T | Milling | Semi Hard | PVD | 90% |
| Sandvik | GC1040 | Milling | Semi Tough | PVD | 85% |
| Sandvik | GC1010 | Milling | Very Hard | PVD | 80% |
| Sandvik | GC3330 | Milling | Semi Hard | CVD | 75% |
| Sandvik | H10 | Milling | Hard | Uncoated | 65% |
| Sandvik | H13A | Milling | Semi Hard | Uncoated | 65% |
| Sandvik | GC4330 | Milling | Tough | CVD | 55% |
| Sandvik | GC3040 | Milling | Tough | CVD | 50% |
| Sandvik | GC4340 | Milling | Tough | CVD | 50% |
| Sandvik | S40T | Milling | Tough | CVD | 50% |
