- Application Range
- Compatible Grades
- Cutting Speeds
Sumitomo - ACK200 Menu
General Information: | ||
---|---|---|
Brand | Sumitomo | |
Grade Status | Old Version | |
Substrate Class | Semi Hard | |
Coat Type | CVD | |
Post Treat | Y |
OLD GRADE NOTICE!
ACK200 is an older generation grade that is no longer recomended by Sumitomo
The recomended modern alternative is :ACK2000
The data below is the data for ACK2000 However, It should be fairly accurate also for ACK200
From Sumitomo's website:
For high-speed cast iron milling. Stable long tool life with high-speed machining is realised by adopting a tough carbide substrate and a new coating with excellent thermal resistance.
Application Range for ACK2000 (ACK200)
Equivalent Grades for ACK2000 (ACK200)
The most compatible grade from each brand!
A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to echo
Cutting Speed recommendations for ACK2000 (ACK200)
How to use our Cutting Speeds Recommendations
- Pay attention that your desired unit (SFM or m/min) is selected!
- Speeds are given for stable conditions of Machine, Tool, and workpiece.
- An empty cell means the grade is not available for the combination of material and application.
- For more specific Cutting Speeds Recommendations use our advanced
SPEEDS AND FEEDS CALCULATOR
Unit Selector: