General Information for Grade AC8015P
| Brand: | Sumitomo | |
| Grade Status | Active - Primary | |
| Main Applications | Turning | |
| Substrate Class | Semi Hard | |
| Coat Type | CVD | |
| Post Treat | Y |
From Sumitomo's website:
Reduced crater damage due to chip abrasion through optimized crystal orientation in the alumina layer.
Application Range for AC8015P
* If you don't understand the below table? Read This Explanation to make the most out of it!
Equivalent Grades for AC8015P
The most compatible grade from each brand!
A higher score (Up to 100%) means the grades are more compatible. A lower score or a particular grade not listed does not mean it is not a good grade. It means that its physical and mechanical properties are less close to AC8015P
Cutting Speed recommendations for AC8015P
How to use our Cutting Speeds Recommendations
- Pay attention that your desired unit (SFM or mm/min) is selected!
- Speeds are given for stable conditions of Machine, Tool, and workpiece.
- An empty cell means the grade is not available for the combination of material and application.
- For more specific Cutting Speeds Recommendations use our advanced
SPEEDS AND FEEDS CALCULATOR
Unit Selector:
SFM mm/min